4OM-1050-002 - 第171页

Error ID Item Description 060601 T able-Y Axis Servo Alarm Emergency stop 060602 T able-Y Axis Servo Alarm Encoder error 060603 T able-Y Axis Servo Alarm Mechatrolink cut error 060604 T able-Y Axis Servo Alarm Location t…

100%1 / 345
Error ID Item Description
0605cb Table-Y Axis Servo Alarm Encoder echoback error. [Shutdown touch sw key and
mainbreaker sw off.]
0605cc Table-Y Axis Servo Alarm Multiturn limit disagreement
0605d0 Table-Y Axis Servo Alarm Position error pulse overflow
0605e0 Table-Y Axis Servo Alarm No option
0605e1 Table-Y Axis Servo Alarm Option time out
0605e2 Table-Y Axis Servo Alarm Option WDC error
0605e5 Table-Y Axis Servo Alarm WDT error
0605e6 Table-Y Axis Servo Alarm Communication error
0605ea Table-Y Axis Servo Alarm Servo pack error
0605eb Table-Y Axis Servo Alarm Servo pack access error
0605ec Table-Y Axis Servo Alarm Servo pack WDC error
0605ed Table-Y Axis Servo Alarm Command not execute
0605f1 Table-Y Axis Servo Alarm Power line open phase
060591 Table-Y Axis Servo Alarm Overload warning
060592 Table-Y Axis Servo Alarm Regenerative overload warning
060594 Table-Y Axis Servo Alarm Data setting warning
060595 Table-Y Axis Servo Alarm Command warning
060596 Table-Y Axis Servo Alarm Communication warning
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
0110-003 2-5 4 AFO01ETRP
3.3 Error IDs and Remedial Procedures
Error ID Item Description
060601 Table-Y Axis Servo Alarm Emergency stop
060602 Table-Y Axis Servo Alarm Encoder error
060603 Table-Y Axis Servo Alarm Mechatrolink cut error
060604 Table-Y Axis Servo Alarm Location timeout
060605 Table-Y Axis Servo Alarm Position error pulse overflow error
060606 Table-Y Axis Servo Alarm Software limit (-)
060607 Table-Y Axis Servo Alarm Software limit (+)
060608 Table-Y Axis Servo Alarm Illegal parameter
060609 Table-Y Axis Servo Alarm System error
06060a Table-Y Axis Servo Alarm Illegal command
06060b Table-Y Axis Servo Alarm Servo on time out
06060c Table-Y Axis Servo Alarm Servo off time out
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
060701 Table-Y Axis Interlock Movement cannot take place until the index angle is adjusted.
060702 Table-Y Axis Interlock Movement cannot take place until the x/y chute is at
correct position.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
060801 Table-Y Axis Communication Communication error was detected.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
0110-003 2-5 5 AFO01ETRP
3.3 Error IDs and Remedial Procedures
Error ID Item Description
070502
XY Conveyor Axis Servo Alarm
User constant breakdown. [Shutdown touch sw key and
mainbreaker sw off.]
070503
XY Conveyor Axis Servo Alarm
Main circuit encoder error
070504
XY Conveyor Axis Servo Alarm
User constant setting error. [Shutdown touch sw key and
mainbreaker sw off.]
070505
XY Conveyor Axis Servo Alarm
Combination error
070510
XY Conveyor Axis Servo Alarm
Overcurrent or Heat Sink Overheated. [Shutdown touch sw
key and mainbreaker sw off.]
070530
XY Conveyor Axis Servo Alarm
Regeneration error detected
070532
XY Conveyor Axis Servo Alarm
Regenerative overload
070540
XY Conveyor Axis Servo Alarm
Overvoltage
070541
XY Conveyor Axis Servo Alarm
Undervoltage
070551
XY Conveyor Axis Servo Alarm
Overspeed
070571
XY Conveyor Axis Servo Alarm
Overload: high load
070572
XY Conveyor Axis Servo Alarm
Overload: low load
070573
XY Conveyor Axis Servo Alarm
Dynamic break overload
070574
XY Conveyor Axis Servo Alarm
Overload of Surge Current Limit Resistor
07057a
XY Conveyor Axis Servo Alarm
Heat sink overheated
070581
XY Conveyor Axis Servo Alarm
Encoder backup error. [Shutdown touch sw key and
mainbreaker sw off.]
070582
XY Conveyor Axis Servo Alarm
Encoder checksum error. [Shutdown touch sw key and
mainbreaker sw off.]
070583
XY Conveyor Axis Servo Alarm
Absolute encoder battery error
070584
XY Conveyor Axis Servo Alarm
Encoder data error. [Shutdown touch sw key and mainbreaker
sw off.]
070585
XY Conveyor Axis Servo Alarm
Encoder overspeed
070586
XY Conveyor Axis Servo Alarm
Encoder overheated
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
0110-003 2-5 6 AFO01ETRP
3.3 Error IDs and Remedial Procedures