4OM-1050-002 - 第285页

0210-001 2 - 160-5 AFO01ETRP 3.3 Error IDs and Remedial Procedures Error ID ltem Description 800901 Alarm For Shortage of Comp. The tape end was detected. 800902 Alarm For Shortage of Comp. Few components to feed. (Cause…

100%1 / 345
0210-001 2-160-4 AFO01ETRP
3.3 Error IDs and Remedial Procedures
Error ID ltem Description
800701 Alternated Block Comp. Missing(sensor)
800702 Alternated Block Comp. Vertical(sensor)
800703 Alternated Block Comp. Missing(recog.)
800704 Alternated Block Comp. Recog. Error
800705 Alternated Block Shortage of component
800706 Alternated Block Start recovery mode.
800707 Alternated Block Comp. Thickness(sensor)
800708 Alternated Block Comp. Pickup Diff.(recog.)
800709 Alternated Block Comp. Reverse(recog.)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
800801 Start Auto Recovery Mode Comp. Missing(sensor)
800802 Start Auto Recovery Mode Comp. Vertical(sensor)
800803 Start Auto Recovery Mode Comp. Missing(recog.)
800804 Start Auto Recovery Mode Comp. Recog. Error
800805 Start Auto Recovery Mode Shortage of component
800806 Start Auto Recovery Mode Start recovery mode.
800807 Start Auto Recovery Mode Comp. Thickness(sensor)
800808 Start Auto Recovery Mode Comp. Pickup Diff.(recog.)
800809 Start Auto Recovery Mode Comp. Reverse(recog.)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
0210-001 2-160-5 AFO01ETRP
3.3 Error IDs and Remedial Procedures
Error ID ltem Description
800901 Alarm For Shortage of Comp. The tape end was detected.
800902 Alarm For Shortage of Comp. Few components to feed.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
800A01 Product Information Finished product interval :
800A02 Product Information Auto run interval :
800A03 Product Information Nozzle usage interval :
800A04 Product Information Product started by RUN MODE “PASS” Operation.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
800B01 Machine Interface Signal No signal from furnace.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
800C01 Cancel Recovery on
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
Error ID ltem Description
800D01 Maintenance Warning Trash box fill up warning.(notice count over)
800D02 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Oil-Checkup/Weekly)
800D03 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Oil-Checkup/Monthly)
800D04 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Oil-Checkup/3-Monthly)
800D05 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Oil-Checkup/6-Monthlyy)
800D06 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Oil-Checkup/Designate #1)
800D07 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Oil-Checkup/Designate #2)
800D08 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Upkeep-Checkup/Nozzle)
800D09 Maintenance Warning Keep the machine condition.
(maintenance cycle time : Upkeep-Checkup/Filter #1)
800D0A Maintenance Warning Keep the machine condition.
(maintenance cycle time : Upkeep-Checkup/Filter #2)
800D0B Maintenance Warning Keep the machine condition.
(maintenance cycle time : Designate-Checkup/Item #1)
800D0C Maintenance Warning Keep the machine condition.
(maintenance cycle time : Designate-Checkup/Item #2)
800D0D Maintenance Warning Keep the machine condition.
(maintenance cycle time : Designate-Checkup/Item #3)
800D0E Maintenance Warning Component box fill up warning.(notice count over)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
800E01 Program Change Warning Check the setup of machine.(program change completed)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0210-001 2-160-6 AFO01ETRP