4OM-1050-002 - 第93页

1.4 Maintenance Method (26-2) When the [Start Reference Mark Detection] button is pressed in the "Ref Mark Detect" tab sheet, the following sheet appears. Fig. 4A84-17 (26-3) Press the [ON] button entitled &quo…

1.4 Maintenance Method

0307-005 1-76 AFO01ETRP

(23) Wipe off excess grease from the linear guide section with an oiled

rag.

It is also required to clean the linear scale encoder heads.

Refer to "1.4.9 Cleaning of Linear Scale Sections" for details.

(24) Clean the linear guides (12 places) in the same way.

Whenever you notice that you forgot to clean any of the linear

guides, press the [Back] button. In 2 seconds, press the

[ENABLE] button on the operation panel. The previous clean-

ing position is selected.

Press the [End] button to terminate the operation.

Press the [ALL] button entitled "ZERO". In 2 seconds, press the

[ENABLE] button on the operation panel to zero all device.

(25) After the lubrication is completed, be sure to attach the lubrication

covers to the front and rear sides of the machine.

(26) Confirm whether the reference mark on the linear scale can be

detected or not.

(26-1) When the [Ref Mark Detect] tab is pressed in the "Fdr.

Crg." tab sheet, the following tab sheet appears.

Fig. 4A84-16 "Ref Mark Detect" Tab Sheet

1.4 Maintenance Method

(26-2) When the [Start Reference Mark Detection] button is

pressed in the "Ref Mark Detect" tab sheet, the following

sheet appears.

Fig. 4A84-17

(26-3) Press the [ON] button entitled "MOVE". In 2 seconds,

press the [ENABLE] button on the operation panel.

Feeder Carriages #3 and #4 move to the F1 side and the

following sheet appears.

Fig. 4A84-18

(26-4) Press the [Next] button.

When the [ENABLE] button on the operation panel is

pressed in 2 seconds after the [ON] button (entitled

"MOVE"), "2. Move F4 Axis to Ref Mark (-)" is executed.

Follow the same procedure repeatedly and confirm that

the reference marks (Procedure of Operation: 3 through

9) are detected.

0307-002 1-77

AFO01ETRP

1.4 Maintenance Method

1.4.9 Cleaning of Linear Scale Sections

To avoid any malfunction of the feeder carriages, the linear scales and

the linear scale encoder heads must be cleaned every three months

or whenever the linear guides are lubricated.

It is also required to check how the device (the device for which a

reference mark detection is made) works.

••

• Cleaning of Linear Scales

(1) When the [Linear Scale Clean] tab is pressed in the "Fdr. Crg." tab

sheet, the following tab sheet appears.

Fig. 4A84-20 "Linear Scale Clean" Tab Sheet

0307-002 1-78

AFO01ETRP