Installation_Manual_SIPLACE_Explorer_2.4_EN - 第28页
3 Installing SIPLACE Explorer Installation and Configuration Guide SIPLACE Explorer 3.1 Initial Installation of SIPLACE Explorer 2.4 Edition 08/2008 EN 28 → Y ou will be guided through the SIPLACE Explorer installa tion …
Installation and Configuration Guide SIPLACE Explorer 3 Installing SIPLACE Explorer
Edition 08/2008 EN 3.1 Initial Installation of SIPLACE Explorer 2.4
27
3.1.1 Installation of SIPLACE Explorer 2.4 - Initial Installation
NOTE
You must have Windows administrator privileges to perform installation. 3
→ Place the support media DVD in your DVD drive. Follow the instructions in the document
“Navigation Guide for the Installation Procedure of SIPLACE Software Systems” (Art.No.
00195050-xx).
→ Place the SIPLACE Explorer CD in your CD-ROM drive. The Start screen will open.
3
Fig. 3 - 2 SIPLACE Explorer setup - Start screen
→ Select SIPLACE Explorer 2.4.
3 Installing SIPLACE Explorer Installation and Configuration Guide SIPLACE Explorer
3.1 Initial Installation of SIPLACE Explorer 2.4 Edition 08/2008 EN
28
→ You will be guided through the SIPLACE Explorer installation procedure.
3
Fig. 3 - 3 SIPLACE Explorer welcome
→ Exit all other programs and then click on Next. The License Agreement dialog box will open.
→ Read the license agreement. If you agree with the conditions, click I accept ..., otherwise, click
on I do not accept .... If you select I do not accept ..., the installation procedure will be
terminated.
3
Fig. 3 - 4 SIPLACE Explorer setup - license agreement
→ Confirm your selection with Next.
Installation and Configuration Guide SIPLACE Explorer 3 Installing SIPLACE Explorer
Edition 08/2008 EN 3.1 Initial Installation of SIPLACE Explorer 2.4
29
→ Before you can run SIPLACE Explorer, J2SE Runtime Environment 6.0 update 1 or higher
must be installed on your PC. If it is already installed on your PC, installation will begin
automatically.
→ However, if the installation procedure is unable to find J2SE 6.0. update 1, the Locate J2SDK
dialog box will appear on your screen.
3
Fig. 3 - 5 SIPLACE Explorer setup - locate JAVA 2 SDK
→ In this case, you can either enter the path to the J2SE Runtime Environment 6.0 update 1 folder
directly into the text field or click on the Browse button and use the Open File dialog box to
find the J2SE Runtime Environment 6.0 update 1 folder.
→ If you failed to correctly specify the path to the folder in which J2SE Runtime Environment 6.0
update 1 is installed, you will see the following message.
3
Fig. 3 - 6 SIPLACE Explorer setup - unable to locate J2SE
→ Click OK to return to the previous screen. SIPLACE Explorer requires J2SE Runtime
Environment 6.0 update 1 to be installed prior to installation of SIPLACE Explorer.
→ At this point, you can either try to specify the J2SE Runtime Environment 6.0 update 1 folder
again, or click Cancel to exit the installation of SIPLACE Explorer.