00193437-03_AI_PowerSupplyConversion_DE EN - 第276页
8 Converting the power supply on the HS-XX / Di machine using PKE32/XTU-32 Assembly Instructions, Converting the Power Supply 8.7 HS-60 / D1 / D2 / D4 circuit diagrams 12/2013 Edition 274 8.6.7 Inst alling the power supp…
Assembly Instructions, Converting the Power Supply 8 Converting the power supply on the HS-XX / Di machine using PKE32/XTU-32
12/2013 Edition 8.6 Converting the power supply from 3 x 208 VAC to 3 x 400 VAC
273
8.6.6 Reconnecting the inrush current limiter board
The inrush current limiter board is located on the back of the front panel (see item EST in Fig. 8 -
10, page 272.
Move the following jumpers (see Fig. 8 - 12):
B3 from terminal X13 to terminal X12,
B2 from terminal X23 to terminal X22 and
B1 from terminal X33 to terminal X32.
Reconnect the following wires:
(W) from terminal X14 to terminal X13,
(V) from terminal X24 to terminal X23 and
(U) from terminal X34 to terminal X33.
)
:
Fig. 8 - 12 Reconnecting the inrush current limiter board
8 Converting the power supply on the HS-XX / Di machine using PKE32/XTU-32 Assembly Instructions, Converting the Power Supply
8.7 HS-60 / D1 / D2 / D4 circuit diagrams 12/2013 Edition
274
8.6.7 Installing the power supply unit
Carefully push the power supply unit into the housing until it reaches the stop.
Use the M8 hexagon socket-head screw to secure the unit at the bottom.
Check that the yellow-green PE wire is connected to the door.
Close the door.
PLEASE NOTE: 8
Make sure that the actuating shaft of the main switch slides easily into the opening in the ro-
tary button. 8
Use the machine key to lock the door.
8.6.8 Carry out the safety check to DIN EN 60 204
When the conversion is complete, carry out a safety check to DIN EN 60 204.
Follow the procedure described in section 2, page 146 onwards.
8.7 HS-60 / D1 / D2 / D4 circuit diagrams
3 x 208 V conversion kit for HSxx/D, for USA
00119801-010102LD4, 2 sheets, see page 275
and 276 8
3 x 400 V conversion kit for HSxx/D, international
00119802-010101LD4, 2 sheets, see page 277
and 278 8
Assembly Instructions, Converting the Power Supply 8 Converting the power supply on the HS-XX / Di machine using PKE32/XTU-32
12/2013 Edition 8.7 HS-60 / D1 / D2 / D4 circuit diagrams
275
8
Fig. 8 - 13 3 x 208 VAC Conversion Kit for HSxx/D, 00119801-010102LD4, sheet 1 of 2
E
D
C
B
A
123
4
Warnschild Nr. 211
CEE-Connector
CEE-Stecker
danger sign
(NC)
K11
Umverdrahtet für
USA 3 x 208 V~
Reconnected for the
USA 3 X 208 VAC
03098183-XX
PKE32/XTU-32
Motorschutzschalter
Motor Protector Switch
00357871-XX
Steckdosenschutz
In Servicesteckdose einsetzen
Socket guard
Insert into service socket
00345937-XX
Netzkabel für USA
Main Power cable
for USA
Stromversorgung
Power Supply
Überstrom
Over current
HS-60 / D4
D1 / D2
24A
15A
Kurzschluss
Short Circuit
Class 10
Class 10