Vision_Serie_EN_2023 - 第4页
4 Y our production department can meet any requirement using manufacturing equipment from Rehm! With the Vision-Series we offer different systems for optimum soldering processes in the most diverse of manufacturing envir…
Vision-Series
NEW! Vision TripleX
Convection soldering with vacuum and Galden
®
›
The 3-in-1 solution for void-free reow soldering
› Combination of convection soldering with and
without vacuum and vapour phase soldering
› Vacuum down to 10 mbar for reducing the number
of voids in the solder joints
› Removes pores and voids immediately after the
soldering process reliably and vibration free
VisionXS
Convection soldering for Mid-Range applications
› Modular system concept
› Efficient heat transfer
› Stable process for lead-free applications
› Minimal downtime
› Integrated residue management
› User-friendly software tools for process monitoring
VisionXC
Convection soldering with compact design
› Optimized heat transfer and thermal stability
›
Excellent process performance at minimal space
›
Efcient residue management system for a
clean process chamber
VisionXP+ | VisionXP+ Vac
High-End convection soldering
›
Efficient reflow convection soldering process
at highest process stability
›
Industry 4.0
› Vacuum < 10 mbar for reducing the
number of voids in the solder joints
›
Efficient residue management with pyrolysis
›
Highest energy efficiency with reflow soldering
The Vision-Series
As individual as your production
Does your production environment need a compact system which can be adapted optimally to your requirements?
Do you process sensitive electronic components which need to correspond to certain temperature conditions?
Or would you like a system that can solder void-free under a vacuum? We have a diverse range of products!
4
Your production department can meet any
requirement using manufacturing equipment
from Rehm!
With the Vision-Series we offer different systems
for optimum soldering processes in the most
diverse of manufacturing environments. Different
process zone lengths are available depending
on the type of system. The pre-heating, peak and
cooling zones have the same pitch and therefore
are constructed in a modular design. Additional
features such as a vacuum unit for void-free
soldering, double pyrolysis for a better cleaning
result or underside cooling for gentle processing
of high-mass boards are optionally available and
can be added to the system concept seamlessly.
Modular, exible system concept
Energy efcient system with lowest CO
2
emission
Highest process stability even with lead-free soldering
Minimum downtime and lowest maintenance effort
Excellent traceability due to smart software tools
Lowest „Total Cost of Ownership“
The right system for every application
Innovative solutions from Rehm
Save up
to 20 %
energy!
Vision-Series | Modularity
5
Large batch sizes – frequent product changes?
We will nd the best system for you!
Requirements in the eld of reow soldering are as varied as the products produced on an SMD pro-
duction line. That is why we provide you with intensive guidance before the purchase decision as to
which system is the most efcient for the applications you require.
We take all relevant parameters into consideration in the process of this. Take for example the through-
put rate, this is one of the most important parameters for determining the optimum process zone length.
If frequent product changes and multi-shift operation are added to the equation, additional options will
be required that need also be taken into account. After clarifying all the process-relevant parameters,
you can rest assured that you will have a reow soldering system adapted to all your needs, one with
which you can manufacture reliably and efciently. The diverse range of options within the VisionX range
means that we have the right system for every manufacturing environment and for a perfect solder result.
nitrogen
operation
number of
peak zones
length of
heating zones
number of
cooling zones
number of
pre-heating zones
VXP+ nitro 3500 (Typ 734)
System varieties
using the example of VisionXP+ nitro:
TYPE
523
634
734
834
934
944
peak zones
pre-heating zones
cooling zones
Process zone Throughput
*
2450 mm 115 / h
3150 mm 130 / h
3500 mm 145 / h
3850 mm 160 / h
4200 mm 180 / h
4550 mm 200 / h
*
approximated values of a
PCB length of 300 mm and
a distance of 100 mm