X3_X4_Series machine - 第194页
4 Setting up and commissioning User manual SIPLACE X-Series 4.4 Setting up the placement machine Software Version SR.601.xx 11/2005 US E dition 194 4 Fig. 4.4 - 3 Placement m achine feet 4 (1) Outer m achine fo ot, 4 x, …
User manual SIPLACE X-Series 4 Setting up and commissioning
Software Version SR.601.xx 11/2005 US Edition 4.4 Setting up the placement machine
193
the distance between the forks so that the machine is lifted on the side parts of the machine
frame, since this would deform the machine frame.
Æ Make sure that the forks are evenly loaded when you lift the machine. A firm support between
the forks and placement machine will prevent the machine tilting when it is raised. This will
also prevent a one-sided load on the machine feet, which would deform the fixing of the ma-
chine feet. We recommend that a second person watch the machine as it is raised, and make
sure that the machine does not tip to one side when lifted with the fork-lift.
Æ With the fork-lift, raise the machine approximately 35 cm. This will avoid any risk of injuring
your feet if you lower the machine feet accidentally.
The placement machine stands on 6 feet.
– 4 outer machine feet (item 1 in Fig. 4.4 - 3
)
There are two versions of the outer machine feet: 4
– outer machine foot for the PCB conveyor height of 830 mm, length 369 mm,
item no. 03041008-01 (item 1 in Fig. 4.4 - 3
, page 194)
– outer machine foot for the PCB conveyor heights of 900, 930 and 950 mm, length
439 mm, item no. 03000890-02 (item 2 in Fig. 4.4 - 3
, page 194)
– 2 middle machine feet (item 2 in Fig. 4.4 - 3
) with 2 spacers (items 3 and 4 in Fig. 4.4 - 3) for
adjusting the height, if necessary.
4
Fig. 4.4 - 2 Outer machine feet - two versions (dimensions in millimeters)
4 Setting up and commissioning User manual SIPLACE X-Series
4.4 Setting up the placement machine Software Version SR.601.xx 11/2005 US Edition
194
4
Fig. 4.4 - 3 Placement machine feet
4
(1) Outer machine foot, 4 x, 2 versions (see Fig. 4.4 - 2, page 193)
(2) Middle machine foot, 2 x
(3) Spacer on the power supply unit side
(4) Spacer on the pneumatic unit side
(5) Threaded hole for the middle machine foot
(T) Direction of PCB transport
(P) Pneumatic unit
(S) Power supply unit
User manual SIPLACE X-Series 4 Setting up and commissioning
Software Version SR.601.xx 11/2005 US Edition 4.4 Setting up the placement machine
195
4.4.4.1 Presetting the height of the middle machine feet
The middle machine feet are preset first. The spacer must be bolted to the underside in the correct
position for the machine height.
Setting the PCB transport height to 830 mm 4
You will not need a spacer for a PCB transport height of 830 mm.
Æ Screw the middle machine foot as far as possible into the thread provided (see point 5 in
Fig. 4.4 - 3
).
Setting the PCB transport height to 900 mm 4
You will need the spacer for a PCB transport height of 900 mm.
Æ Align the spacer so that the 90 mm side is vertical and the hole for the middle machine foot
points downwards.
4
4
4
4
4
4
4
4
4
4
4
4
Fig. 4.4 - 4 Alignment of the spacer for a transport height of 900 mm
4
(1) Spacer height 90 mm
(2) Middle machine foot
(3) M24 lock nut
(4) Hexagon socket head screw M12x80, 4x