X3_X4_Series machine - 第223页
User manual SIPLAC E X-Series 4 Setting up and commissioning Software Version SR.601.xx 11/2005 US Edition 4.4 Sett ing up the placement machine 223 4.4.1 1 Installing the axi s unit on X2, X3 and X4 4.4.1 1.1 Computer u…
4 Setting up and commissioning User manual SIPLACE X-Series
4.4 Setting up the placement machine Software Version SR.601.xx 11/2005 US Edition
222
4.4.10.7 Installing the "bottom" hand guard
The machines from the X-series are supplied with just
one
"bottom" hand guard. If the machines
are installed within a line, then no hand guard is required between immediately adjacent output
and input conveyors.
WARNING 4
Always fit the "bottom" hand guard (item no. 03003432-01) on the input side of the
first
place-
ment machine and on the output side of the
last
placement machine of a line using 4 hexagon
socket head screws M4x12. This will prevent your personnel reaching into the machine without
authorization.
4
Fig. 4.4 - 19 Fitting the "bottom" hand guard on the PCB input side
(1) "Bottom" hand guard, item no. 03003432-01
User manual SIPLACE X-Series 4 Setting up and commissioning
Software Version SR.601.xx 11/2005 US Edition 4.4 Setting up the placement machine
223
4.4.11 Installing the axis unit on X2, X3 and X4
4.4.11.1 Computer unit - Electrical connection points
4
Fig. 4.4 - 20 Computer unit, front panel - Connecting the plugs
(1) Cable guide plate
+3.3V
Video multiplexer
4 Setting up and commissioning User manual SIPLACE X-Series
4.4 Setting up the placement machine Software Version SR.601.xx 11/2005 US Edition
224
4
Fig. 4.4 - 21 Computer unit, back panel - Connecting the plugs
(1) Cable guide plate
Fan
Battery
+3.6V