X3_X4_Series machine - 第226页

4 Setting up and commissioning User manual SIPLACE X-Series 4.4 Setting up the placement machine Software Version SR.601.xx 11/2005 US E dition 226 4.4.1 1.3 Computer unit X2, X3 and X4 - plug-in connectors on the back p…

100%1 / 464
User manual SIPLACE X-Series 4 Setting up and commissioning
Software Version SR.601.xx 11/2005 US Edition 4.4 Setting up the placement machine
225
4.4.11.2 Computer unit X2, X3 and X4 - plug-in connectors on the front panel
4
*) This plug is intended for cameras.
Æ Also check the following plug-in connectors:
4
**) Only if vision processor option is installed
Computer unit,
front panel
(Fig. 4.4 - 20
)
Plug
Connecting cable NOTE
Plug Cable
X0pr *) X0pr 03009778 Insert as far as the stop
X1pr *) X1pr 03009838 Insert as far as the stop
X2pr *) X2pr 03009755 Insert as far as the stop
X3pr *) X3pr 03009756 Insert as far as the stop
X8pc X8pc 03002970 Secure with screws
X7pc X7pc 03002967 Secure with screws
X5pc X5pc 03002958 + 03002959 Insert as far as the stop
X7pn X7pn 03010055 Secure with screws
X0ps *) X0ps 03009798 Insert as far as the stop
X1ps *) X1ps 03009818 Insert as far as the stop
X2ps *) X2ps 03009757 Insert as far as the stop
X3ps *) X3ps 03009758 Insert as far as the stop
Computer unit,
front panel
(Fig. 4.4 - 20
)
Plug
Connecting cable Computer unit,
front panel
(Fig. 4.4 - 20)
Plug
Plug Cable Plug
X1pe X1pe 03010623 X11pt X11pt **)
X3pe X3pe 03010623 X11pc X11pc
X4pe X4pe 03010623 X11pa X11pa
X1pv X1pv 03010615 X4pa X4pa
X2pv X2pv 03010615 X4pc X4pc
X3pv X3pv 03010619 X4pt X4pt **)
4 Setting up and commissioning User manual SIPLACE X-Series
4.4 Setting up the placement machine Software Version SR.601.xx 11/2005 US Edition
226
4.4.11.3 Computer unit X2, X3 and X4 - plug-in connectors on the back panel
4
4
4.4.11.4 Fitting the computer unit
Æ Plug in the plug-in connectors on the back panel of the computer unit (see section 4.4.11.3).
Æ Carefully lift the computer unit onto the rail in the extension kit.
Æ Make sure that you do not squash any cables.
Æ Check that the cables for the front panel are in the lateral cable routing plate
(item 1 in Fig. 4.4 - 20
, page 223).
Æ Fix the cables to the front panel with cable ties.
Æ Push the computer unit into the extension kit as far as the stop.
Æ Connect the fan cable to the computer unit cable.
Æ Plug in the plug-in connectors on the front panel of the computer unit (see section 4.4.11.2).
Æ Secure the computer unit with the fillister head screw.
Æ Fix the grounding cable to the doors (item 2 in Fig. 4.4 - 16, page 217),
as shown in Fig. 4.4 - 18
on page 221.
Æ Lock the doors.
PLEASE NOTE 4
On X2 placement machines, continue from section 4.4.11.5
"Fitting the side plates".
On X3 and x4 placement machines, continue from section 4.4.12
"Installing the axis unit on X3
and X4" on page 228.
Computer unit,
back panel
(Fig. 4.4 - 21
)
Plug
Connecting cable NOTE
Plug Cable
PE1 Cable ring Grounding cable
Fix as shown in Fig. 4.4 - 18
,
page 221
.
X27pz X27pz 03003437 W1-W2 Insert as far as the stop
X2pz X2pz 03002966 W1-W5 Fix with screws
X1pz X1pz 03002969 W1-W5 Fix with screws
X62pz X62pz 03002488 Snap into place
PE2 Cable lug Grounding cable Insert as far as the stop
P24 / GND X1 Fan in extension kit Insert as far as the stop
User manual SIPLACE X-Series 4 Setting up and commissioning
Software Version SR.601.xx 11/2005 US Edition 4.4 Setting up the placement machine
227
4.4.11.5 Fitting the side plates
Æ Fix the grounding cable to each side plate (item 5 in Fig. 4.4 - 16), as shown in Fig. 4.4 - 18
page 221
.
Æ Fix the side plate to the machine frame with 6 fillister head screws.
Æ Continue from section 4.4.13 "Fitting the main fault indicator", page 230.