X3_X4_Series machine - 第250页
5 Tasks on the machine User manual SIPLAC E X-Series 5.2 Changing shift Software Version SR.601.xx 11/2005 US Edition 250 5.2 Cha nging shif t Æ S pli ce the tapes earl y . The fee der module s do not have to be r efille…
User manual SIPLACE X-Series 5 Tasks on the machine
Software Version SR.601.xx 11/2005 US Edition 5.1 Personnel profile
249
– Soldering paste
– Components
– Feeder modules, etc.
– Setting up the station for a new production batch
– Checking the feeder module settings:
–Increment
– Pick-up position
– Checking the management data
– Asking the responsible programmers to modify placement programs
– Ensuring a smooth flow of information between the individual groups
5.1.3 Service engineer
The service personnel should normally have attended the SIPLACE basic, refresher and service
engineer courses. 5
The service engineer's duties include: 5
– Major preventive maintenance jobs
– Mounting replacement parts
– Editing machine data
– Calibrating the machine
5.1.4 Programmer
The programming personnel should normally have attended the SIPLACE programming course.
The programmer's jobs are as follows: 5
– Preparing CAD files
– Writing placement programs
– Data maintenance
– Data backup
5 Tasks on the machine User manual SIPLACE X-Series
5.2 Changing shift Software Version SR.601.xx 11/2005 US Edition
250
5.2 Changing shift
Æ Splice the tapes early. The feeder modules do not have to be refilled as soon as the new shift
starts. This avoids extended down times.
Æ At the shift change, pass important information on to the next operator. This includes, for in-
stance, changes to the placement program. Also read through the list of the descriptions of
the steps to take in section 5.7
.
Æ Carry out a set-up check.
Make sure that the feeder modules are equipped with the correct components and that they
are at the correct locations in the component trolley.
PLEASE NOTE
Hand over the line in the same state that you would want to find it in when starting your shift.
This means that: 5
– The rejection containers are empty.
– The waste containers are empty.
– The feeder areas have been carefully cleaned with a vacuum cleaner.
User manual SIPLACE X-Series 5 Tasks on the machine
Software Version SR.601.xx 11/2005 US Edition 5.3 Carrying out a walk-through inspection
251
5.3 Carrying out a walk-through inspection
5.3.1 Checking the feeder modules (X-series)
5
Fig. 5.3 - 1 Checking the X feeder modules
(1) Flap
(2) Blade
(3) Status display
(4) LCD display
5
Æ Check to see whether the tape foil removal container for the X tape feeder module is full.
Open the flap (item 1). Pull out the cover foil and cut it with scissors or on the integral blade
(item 2) on 8 and 12 mm X tape feeder modules.