X3_X4_Series machine - 第276页

5 Tasks on the machine User manual SIPLAC E X-Series 5.10 Docking the component trolley in or out Software V ersion SR.601.xx 11/2005 US E dition 276 The safet y concept for the compo nent troll ey chang e requires the o…

User manual SIPLACE X-Series 5 Tasks on the machine

Software Version SR.601.xx 11/2005 US Edition 5.10 Docking the component trolley in or out

275

5.10 Docking the component trolley in or out

5.10.1 Safety instructions for docking component trolleys in and out

WARNING 5

To prevent accidents (risk of crushing), the component trolley may only be docked in or out by

one person.

Fig. 5.10 - 1 Safety instructions for docking the component trolley in or out

(1) Button for docking the component trolley in or out, location 1

(2) Button for docking the component trolley in or out, location 2

(3) Button for docking the component trolley in or out, location 3

(4) Button for docking the component trolley in or out, location 4

(T) Direction of PCB transport

5 Tasks on the machine User manual SIPLACE X-Series

5.10 Docking the component trolley in or out Software Version SR.601.xx 11/2005 US Edition

276

The safety concept for the component trolley change requires the operator to press a button (item

1, 2, 3 or 4 in Fig 5.10 - 1

) on the input or output side of the machine in order to dock the compo-

nent trolley in or out. This ensures that the operator is always standing to the side of the placement

machine. In addition, the component trolley can only be docked in if the protective covers are

closed.

5.10.2 Docking out the component trolley

Æ Click on the STOP PROCESSING PCB icon in the MAIN VIEW menu.

The PCB in progress will be completed. The icons of the SINGLE FUNCTIONS menu will

then be activated. 5

Æ Click on the desired icon SINGLE FUNCTIONS GANTRY.

Æ Select GANTRY FUNCTIONS.

Æ From this menu, click on the GO TO SET-UP POSITION button.

All the placement heads will move across the PCB conveyor to prevent them being damaged

when the component trolley is changed. 5

Æ Press the relevant button on the input or output side of the machine (item 1, 2, 3 or 4 in Fig.

5.10 - 1

) until the trolley is docked out fully.

Æ Swivel the two handles up (item 1 in Fig. 5.10 - 2).

Fig. 5.10 - 2 Component trolley - swivel handles up to push

Æ With both hands on the handles, pull the component trolley out of the placement machine.

User manual SIPLACE X-Series 5 Tasks on the machine

Software Version SR.601.xx 11/2005 US Edition 5.10 Docking the component trolley in or out

277

5.10.3 Safety instructions for moving the component trolley

WARNING 5

To prevent accidents, ALWAYS follow the rules listed below when you move the component trol-

ley.

Æ Always hold the handles with both hands when you want to move the component trolley.

Æ Remember that a component trolley with the full complement of feeder modules can tip over

sideways or forward on gradients of 20° or more.

Æ Make sure that the surface on which the trolley is moved has a significantly smaller gradient.

Æ Be careful not to collide with obstacles. The trolley could tip forward if it is traveling fast

enough.