X3_X4_Series machine - 第32页

2 Operational safety User manual SIPLACE X-Series 2.1 Safety instr uctions Software Version SR.601.xx 11/2005 US E dition 32 2.1.8 Import ant notes on environment a lly-friendly dispos al of materials and component s SIP…

User manual SIPLACE X-Series 2 Operational safety

Software Version SR.601.xx 11/2005 US Edition 2.1 Safety instructions

2.1.6 Safety instructions for laser units

Permission to operate components that are classified as lasers is withdrawn if

– mechanical damage to the unit is observed, or

– any work is done on the mechanical or electrical parts of the unit.

Even damaged or missing screw locking paint on laser components (e.g. cover plates,

fasteners, adjusting potentiometer) counts as work.

– Only SIEMENS service engineers, or the machine owner's service engineers who have

been trained by SIEMENS are allowed to replace laser components.

– Repairs to laser units are carried out at the SIEMENS factory exclusively.

2.1.7 Safety instructions on permanent magnets

Powerful permanent magnets are used for the linear motors of the X and Y axes.

DANGER OF DEATH

POWERFUL PERMANENT MAGNETIC FIELDS INSIDE THE MACHINE 2

The life of persons with passive or active implants such as pacemakers, defibrillators, insulin

pumps etc. is put at risk inside the machine if protective covers are opened.

CAUTION

POWERFUL PERMANENT MAGNETIC FIELDS 2

There is a risk that the powerful magnetic fields could corrupt data on data media or credit cards

and check cards.

2 Operational safety User manual SIPLACE X-Series

2.1 Safety instructions Software Version SR.601.xx 11/2005 US Edition

2.1.8 Important notes on environmentally-friendly disposal of materials

and components

SIPLACE systems are manufactured using only materials and parts that can be easily separated

and disposed of in an environmentally-friendly way. Hazardous materials are not necessary for the

installation, dismantling or operation of the system.

PLEASE NOTE 2

The owner of the system has sole responsibility for the proper environmentally-friendly disposal

of machines, working materials, consumables and wear parts.

Æ Please observe your national statutory provisions for waste disposal and environmental pro-

tection.

User manual SIPLACE X-Series 2 Operational safety

Software Version SR.601.xx 11/2005 US Edition 2.2 Warning labels

2.2 Warning labels

2.2.1 Warning labels W201, W203, W204 and W210 on the machine

The warning labels are made from soft PVC film, and are abrasion-proof, light-fast and resistant

to water and weathering. Their design meets the requirements of ISO 3864-2 and ANSI Z535.4.

Fig. 2.2 - 1 Warning labels W201, W203, W204 and W210 on the placement system - part 1

Pos. W201, item no. 03009338-01

Pos. W203, item no. 03009342-01

Pos. W204, item no. 03009343-01

Pos. W210, item no. 03009350-01

(T) PCB direction of travel