D-serie level 1 EN - 第114页
C&P6/12 Placement Heads Room for Your Sketches and Notes Nozz le Pickup/Place - F unctional Procedure S tuden t Guide Advanced Level 1 SIPLACE D-Series C&P6/12 Placement Heads EN 05/2007 6-34
C&P6/12 Placement Heads
Nozzle Pickup/Place - Functional Procedure Room for Your Sketches and Notes
Student Guide Advanced Level 1 SIPLACE D-Series
EN 05/2007 C&P6/12 Placement Heads
6-33
6.5 Room for Your Sketches and Notes
C&P6/12 Placement Heads
Room for Your Sketches and Notes Nozzle Pickup/Place - Functional Procedure
Student Guide Advanced Level 1 SIPLACE D-Series
C&P6/12 Placement Heads EN 05/2007
6-34
P&P and TWIN Heads
Overview
Student Guide Advanced Level 1 SIPLACE D-Series
EN 05/2007 P&P and TWIN Heads
7-1
7 P&P and TWIN Heads
7.1 Overview
NOTE:
The following descriptions for the D3 TWIN Head also apply correspondingly for the D1 P&P
head.
The D1 P&P head corresponds to one of the two D3 TWIN segments.
Legend
1. Module 1
2. Module 2, rotate by 180 ° compared to module
1.
3. Main board on module 1 and module 2
4. D axis.
5. Linear motor Z-axis
6. Z-axis incremental measurement system
The TWIN Head consists of two identical modules
which work according to the Pick&Place principle.
The second P&P head is rotated 180 degrees.
New nozzles have been developed for the TWIN
Head (type 5xx). However, the nozzles of the
Pick&Place head type 4xx and the nozzles of the
Collect&Place heads type 8xx and 9xx can still be
used with an adapter.