D-serie level 1 EN - 第131页
Component Handling Technical Data - Changeover T ables Overview S tude nt Guide Advanced Level 1 SIPLACE D-Series EN 05/2007 Component Handling 8-1 8 Component Handling 8.1 Overview 8.1.1 T echnical Dat a - Changeover T …
P&P and TWIN Heads
Room for Your Sketches and Notes Functions
Student Guide Advanced Level 1 SIPLACE D-Series
P&P and TWIN Heads EN 05/2007
7-16
Component Handling
Technical Data - Changeover Tables Overview
Student Guide Advanced Level 1 SIPLACE D-Series
EN 05/2007 Component Handling
8-1
8 Component Handling
8.1 Overview
8.1.1 Technical Data - Changeover Tables
Feeder capacity for D1/
D2 machines:
90 tracks for 8 mm tapes with 3x8 mm feeders
60 tracks for 8 mm tapes with 2x8 mm feeders
Feeder capacity for D4
machines:
144 tracks for 8 mm tapes with 3x8 mm S feeders
96 tracks for 8 mm tapes with 2x8 mm S feeders
Locations for D1/D2
machines:
2 changeover tables with integrated waste tape container
15 feeder positions, each one with 30 mm on each changeover table
Option: Waffle Pack Changer (10 feeder positions – 30 mm wide)
Locations for D4
machines:
4 changeover tables with integrated waste tape container
12 feeder positions, each one with 30 mm on each changeover table
Feeders: Tapes, bulkcase, linear feeder, Siplace S feeder (F4, F5,S20, S23, S25HM,
S27HM, HS50, HS50+,HS60), OEM feeder, surftape feeder (8, 12, 16, 24
mm), manual trays
Interface to the
machine
Plug-in connection to machine
- Power supply
- CAN bus connection
- Closing the safety loop
- Compressed air connection
- Splice point recognition connection (optional)
Changeover table
height
depend from the machine height:
830 mm ± 15 mm (standard)
900 mm ± 15 mm (SMEMA)
930 mm ± 15 mm (SMEMA)
950 mm ± 15 mm (SMEMA)
Component Handling
Overview Changeover Table
Student Guide Advanced Level 1 SIPLACE D-Series
Component Handling EN 05/2007
8-2
8.1.2 Changeover Table
8-1: Overview: Changeover table design (D1/D2)
Legend
Overview of settings
1 Moveable base with fixed and guide castor 5 Communication unit
2 Tape reels container 6 Table plate
3 Tape waste container 7 Switch for lowering the changeover table
4 Handle 8 Area for excess partition plates or setup lists
Description Tools &Equipment Adjustments
Setting the changeover tables
to the machine height.
Suitable lifting device and
eyebolt
See D1/D2 operating manual.
Relocate the changeover table
supply cable for the correct
location.
Changeover table option
equipment: The table can only
be raised and lowered when it
is connected to the machine.
The table supply cable is hooked up to the correct
table side before lowering, the table is moved into
the machine, is connected and then lowered.