D-serie level 1 EN - 第191页
SIPLACE Measuring Tools Scope of Delivery Location Tester S tude nt Guide Advanced Level 1 SIPLACE D-Series EN 05/2 007 SIPLACE Measuring T ools 11 - 7 1 1.6 Location T ester 1 1.7 Power Pack for St ar Inst allation Loca…
SIPLACE Measuring Tools
SIPLACE Diagnosis Adapter A364 [03051220-01] Scope of Delivery
Student Guide Advanced Level 1 SIPLACE D-Series
SIPLACE Measuring Tools EN 05/2007
11-6
11.5 SIPLACE Diagnosis Adapter A364 [03051220-01]
11-3: Adapter card for A364
Application:
The adapter card is used to check the A364 axis
controller board dynamics.
The A364 axis board is equipped with two
processors (module 1 and module 2) i.e. one
processor controls two axes.
Legend
Module 1: axis 1/2
Module 2: axis 3/4
1. Bootstrap mode: m1=module1/m2=module2
2. Diagnosis – connector X6
3. Connection X3 SIPLACE axis tester
4. Connection X2 axis test box
5. Connection X1 to A364
6. Switch:
– S3: for 7 segment display between
modules 1 and 2
– S2: selection module 2 axis 3 and 4
– S1: selection module 1 axis 1 and 2
7. Diagnosis 7-segment display
8. CAN Bus connector (Sub-D)
9. BNC socket:
– Position deviation 1/2 – 3/4 depending on
switch setting S1, S2
– Torque-forming current I-
target
1/2 – 3/4
according to switch position S1, S2
– END 1 - 4 end position signal of axes 1 - 4
– Upstream end position signal: Trigger m1
for axes 1/2, trigger m2 for axes 3/4,
according to switch position S1, S2
10. Reset both processors
SIPLACE Measuring Tools
Scope of Delivery Location Tester
Student Guide Advanced Level 1 SIPLACE D-Series
EN 05/2007 SIPLACE Measuring Tools
11-7
11.6 Location Tester
11.7 Power Pack for Star Installation
Location tester
Application:
The location tester is used to check the
connections for the feeder modules at the
communication unit of the changeover table.
Power pack adjustment aid for star
installation on DLM1 C&P head
Item No.: 00353277-01
Application:
The power pack is used as an adjustment aid
for installation of the star (C&P placement
head).
SIPLACE Measuring Tools
Belt Tension Measuring Device [00326015-01] Scope of Delivery
Student Guide Advanced Level 1 SIPLACE D-Series
SIPLACE Measuring Tools EN 05/2007
11-8
11.8 Belt Tension Measuring Device [00326015-01]
11.9 SIPLACE Compressed Air Testing Device [00311487-01]
Belt tension device
Application:
This is used for measuring the belt tension
(toothed belts) in the machine.
SIPLACE compressed air testing device
GDH 14
Application:
The compressed air testing device is used to
set the air blast at the placement heads C&P6
and C&P12 for SIPLACE placement
machines.