OM-1650-001_w - 第15页

OM-1650 12 6. Pattern Program (5) Lighting Level (Coax) Select the brightness level (one of the options described below) of the coaxial lighting for the PEC recognition camera in this text box. [Std], [-80%], [-60%], [-4…

OM-1650

6. Pattern Program

[10] Overall PCB BBR

(1) Mode

Select one of the following options for the overall PCB BBR function.

Disable

: The overall PCB BBR detection function is not used.

Enable

: The overall PCB BBR detection function is used.

(2) X [mm], Y [mm]

When "Enable" is selected in the "Mode" text box, the coordinates (X

and Y) of the bad mark should be set for the overall PCB BBR detection

function.

Note

Overall PCB BBR Detection Function

When there are a few unit PCB's with a bad mark and most of the unit

PCB's are of good quality, then use the overall PCB BBR function.

Before a bad mark detection for each unit PCB, perform overall PCB BBR

detection. If any bad mark is not detected in overall PCB BBR detection,

then all the unit PCB's are regarded as good PCB's and the unit PCB BBR

detection is not performed.

Placement Coordinate Reference (No)

X (Horizontal)

Y (Vertical)

Bad Mark for Overall PCB BBR Function

Bad Marks

Notice

When this function is set to "Enable", all the PCBs without a master

bad mark, are processed as good PCBs.

When a bad mark has been placed on any unit PCB, take care not

to forget placing a master bad mark.

(3) Value of threshold

Set the threshold value for bad mark determination.

•

Data Input Range:

1 to 255

Reference

Refer to "9. Bad Mark Camera Test" for the threshold value.

(4) Inspection Area [mm]

Set the area for the PEC recognition camera to detect a bad mark.

•

Data Input Range:

0.1 to 1.0

1006-001

OM-1650

6. Pattern Program

(5) Lighting Level (Coax)

Select the brightness level (one of the options described below) of the

coaxial lighting for the PEC recognition camera in this text box.

[Std], [-80%], [-60%], [-40%], [-20%],

[+20%], [+40%], [+60%], [+80%], [Off]

(6) Lighting Level (Ring)

Select the brightness level (one of the options described below) of the

ring lighting for the PEC recognition camera in this text box.

[Std], [-80%], [-60%], [-40%], [-20%],

[+20%], [+40%], [+60%], [+80%], [Off]

(7) Lighting Level (Option)

Select the brightness level of the optional lighting level for the PEC

recognition camera in this text box.

[Std], [-80%], [-60%], [-40%], [-20%],

[+20%], [+40%], [+60%], [+80%], [Off]

(8) Image

Set the image of the bad mark for the overall PCB BBR detection.

Black (E/NR)

: A black mark (E/NR) is used.

White (E/R)

: A white mark (E/R) is used.

1006-001

OM-1650

6. Pattern Program

6.2 Placement Data (P Data)

When "Mode" in "Unit PCB BBR" is set to "Normal", set the bad mark

coordinates in the "P-No. 1" step data box in the Placement Data (P Data).

[1] [2]

"Placement Data (P Data)" Tab Sheet F7

[1] X[mm] and Y[mm] in "P-No. 1" Step

Set the coordinates (BX1, BY1) of the bad mark based on the pattern origin.

[2] C for "P-No. 1" Step

Set the control command to "B".

Placement Coordinate

Reference Point

(OX1,OY1)

(OX

2,OY2)

Pattern Origin (OX

3,OY3)

Pattern 1

Bad Mark Affixing Position (BX

1,BY1)

Pattern 2

Pattern 3

1006-001