OM-1650-001_w - 第31页

OM-1650 28 1 1. Bad Mark Communication Function [3] [BBR Info Clear] Button When this button is pressed, the unit selection window for the "BBR Info Clear" is displayed. There, the unit where the bad mark data …

OM-1650

11. Bad Mark Communication Function

11.1 "Product." Window

[1]

[3]

[2]

F25

[1] PCB ID Display

When the communication in the input machine has been set to "Enable", the

"PCB ID" received from the input machine is displayed.

When the communication in the input machine has been set to "Disable", the

"PCB ID" created in the machine is displayed.

Reference

Refer to "11.2 OPERATION Window" for the input machine

communication setup.

[2] Defective PCB Count Display

The No. of defective PCBs in the PCBs to be produced is displayed. When

there is no defective PCB, the background color is turned green and when

there is any defective PCB, the background color is turned red.

1006-001

OM-1650

11. Bad Mark Communication Function

[3] [BBR Info Clear] Button

When this button is pressed, the unit selection window for the "BBR Info

Clear" is displayed. There, the unit where the bad mark data is to be deleted,

can be selected.

F26

When the unit where the bad mark data is deleted, is selected, the "BBR Info

Clear" execution window appears, where the bad mark data can be deleted.

F27

1006-001

OM-1650

11. Bad Mark Communication Function

11.2 "OPERATION" Window

[1]

[3]

[2]

F28

[1] Receive from upstream machine

Using this selection button, whether or not the upstream (input) machine

communication is used, is selected.

[2] Send to downstream

machine

Using this selection button, whether or not the downstream (output) machine

communication is used, is selected.

[3] [Init Value], [Apply] and [Cancel] Buttons

[Init Value]

: When selected, the initial values for the bad mark

communication setup are returned.

[Apply]

: When selected, the setup is applied.

[Cancel]

: When selected, the setup is cancelled.

1006-001