OM-1650-001_w - 第5页

2 1006-001 • Identifying Alert Icons : This symbol mark represents danger or prompts warning. : This symbol mark represents prohibited operations. : This symbol mark represents forced operations or instructions. • Identi…

1006-001

Before Use

We are grateful to you for purchasing this products.

Before operation of the machine, please read carefully the cautions and warnings, and

items in "Safety Precautions" in the beginning of the instruction manual for the machine

body and be sure you understand the instructions and cautions to perform the correct and

safety operation.

After reading through this manual, please use this manual as an occasional reference and

keep it within reach.

1. The safety precautions are expressed, using the combinations of safety alert symbols

" " and headwords such as "DANGER", "WARNING", or "CAUTION" according

to the degree of danger.

Please fully understand the meaning of each precautionary item for safety purposes.

The safety alert symbols " " are used to indicate a potential personal injury

hazard.

Please pay attention to all safety messages that follow the safety alert symbols to avoid

any possibility of injury or death.

DANGER

This indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury. This signal word

is limited to the most extreme situations.

WARNING

This indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

This indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

A precautionary item identiﬁ ed as "

CAUTION" may also lead the operator

to reach a serious result. To avert a serious result, please respect the described

cautions.

NOTICE

This indicates a potentially hazardous situation which, if not

avoided, may result in property damages.

2. Explained in this manual are only the items different from those in the instruction

manual of the main machine.

Please use the instruction manual of the main machine together with this manual.

OM-1650

1006-001

•

Identifying Alert Icons

: This symbol mark represents danger or prompts warning.

: This symbol mark represents prohibited operations.

: This symbol mark represents forced operations or instructions.

•

Identifying Icons in Manual

Notice

This icon shows an important precautionary or a regulatory item.

Note

This icon shows the descriptions for correct operations of the machine.

Reference

This icon shows the items to be referred to.

Procedure

This icon shows the operation procedures.

OM-1650

Contents

Page

1006-001

Before Use ............................................................................................ 1

Contents ............................................................................................. 3

1. Scope ............................................................................................. 4

2. Functions ........................................................................................ 4

3. Rough View of Machine ................................................................. 5

4. Scope of Actions ............................................................................ 6

5. Preparation Before Operation ........................................................ 7

5.1 In Sensor Mode ...................................................................... 7

5.2 In Camera Mode ..................................................................... 7

6. Pattern Program ............................................................................. 8

6.1 Operation Data ....................................................................... 8

6.2 Placement Data (P Data) ........................................................ 13

6.3 Placement Data (O Data) ....................................................... 14

7. Offset Data ..................................................................................... 15

8. Procedure for Bad Mark Sensor Adjustment .................................. 16

9. Bad Mark Camera Test .................................................................. 19

10. Camera Bad Mark Teaching ........................................................... 23

11. Bad Mark Communication Function ............................................... 26

11.1 "Product." Window .................................................................. 27

11.2 "OPERATION" Window ........................................................... 29

12. Speciﬁcations ................................................................................. 30

13. Electrical Circuit Diagrams ............................................................. 33