00197496-01_UM_SiClusterMultiline_DE_EN - 第143页
How to Configure a Multi Line Job 4.8.1 Dialog Box: Settings Ideal Line Cycle Times SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline 143 Result Result: ideal cycle times successfu lly calculated ▪ Calculation of i…
How to Configure a Multi Line Job
Ideal Line Cycle Times 4.6.1 Initial Setups Added - Result
142 SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline
Multi-job optimization.
▪The Status, Errors, Warnings, Infos column shows messages which occurred during the calculation
of the ideal cycle times.
How to Configure a Multi Line Job
4.8.1 Dialog Box: Settings Ideal Line Cycle Times
SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline 143
Result
Result: ideal cycle times successfully calculated
▪ Calculation of ideal cycle times was successful.
4.8.1
4.8.1 Dialog Box: Settings
Dialog Box: Settings
You can define multi line job settings for handling temporary jobs which are created when ideal cycle
times are calculated.
► Go to the SiCluster Multiline menu and select the icon.
⇨ The Settings dialog box is opened.
Dialog box: settings
How to Configure a Multi Line Job
Ideal Line Cycle Times 4.8.1 Dialog Box: Settings
144 SIPLACE SiCluster Multiline SIPLACE SiCluster Multiline
Parameter Description
Ideal cycle time phase
Ask before deleting
the jobs for calculating
the ideal cycle times
Enabled: At the end of ideal cycle time calculation, you will be asked whether
you want to delete the temporary jobs or not.
Always delete the jobs
for calculating the ide-
al cycle times
Enabled: At the end of ideal cycle time calculation, the temporary jobs will be
deleted without asking.
Never delete the jobs
for calculating the ide-
al cycle times
Enabled: The temporary jobs will not be deleted.
Mode for optimization parameter configuration
Either the cluster jobs or the jobs will be affected accordingly, depending on which tab is enabled at
Run & Results (Line KPIs or Cluster Job Details)
Write all parameters of
the first selected clus-
ter job / job to all other
selected cluster jobs /
jobs
All parameters for the first cluster job will be saved in the following cluster jobs.
Write only changed
parameters of the first
selected cluster job /
job to all other select-
ed cluster jobs / jobs
Only individually changed values for the first cluster job will be saved in the fol-
lowing cluster jobs.