Brochure_Europlacer_ii-P7_English_Web - 第2页
Monitor With 22” Touch Screen And Intuitive ii-PS Software Speed As fast as 5 seconds cycle time S-Track Barcode placement for complete process traceability 2D+ Paste Inspection Post print evaluation of solder paste depo…
ii-P7
Advanced Printing Solutions
Monitor With 22”
Touch Screen
And Intuitive
ii-PS Software
Speed
As fast as
5 seconds
cycle time
S-Track
Barcode placement
for complete
process traceability
2D+ Paste
Inspection
Post print evaluation of
solder paste deposit for
presence and bridging
SmartCal2
90-second
full calibration
Under PCB
Clearance
30mm underside
component
Advanced
Printing
Solutions
The Europlacer ii-P7 is an industry-leading screen
printer renowned for its exceptional performance
and unique features.
It incorporates 1-micron linear encoders on every
axis delivering a consistent print, perfectly dened
each time. The ii-P7 is controlled by our advanced
ii-PS software and compliments both high-mix and
high-volume production environments.
The ii-P7 SmartCal2 calibration system ensures
perfect alignment between the PCB and the stencil.
An efcient single-pass under screen cleaner will
help to save time at the start of the process.
Solder paste and adhesive dispensing is enhanced
via Europlacer’s ADU+ which coupled with the
application of barcodes with S-Track brings full
traceability to your production line from the very
start of the production process.
CFX & Hermes
Compatibility
Latest industry
communication protocols
Single-pass cleaning
system
►
Wet/Dry/Vacuum in one
cycle
►
Paper/Solvent level sensor
►
Cassette paper change
system (Optional)
ADu+
Precise solder paste
and adhesive deposition
Machine Simplicity
Ultra low maintenance
Fast set-up
Low cost of ownership
Accuracy
►
Exceptional repeatability
20µm @ 6 sigma 2Cpk
►
SmartCal2 Dual roving
camera for a perfect board
and stencil alignment
ii-Tab Management
(coming soon)
Real time monitoring
of critical production data
CFX interface
Warranty
5 years parts warranty*
Benets
Key Features
.
In just 90 seconds, the SmartCal2 system
performs a comprehensive analysis of
numerous critical data points. This includes
localized camera scaling of pixels per
millimeter, rotation and offset calibration
as well as meticulous table Z deviation
assessment. Notably, SmartCal2 has
signicantly enhanced its data gathering
capabilities, now collecting a remarkable
88% more data points to guarantee
the utmost alignment accuracy and
repeatability.
The ii-P7 screen printer can deploy the
unique Advanced Dispense unit (ADu+) to
dispense a wide range of mediums including
paste and glue.
S-Track allows the placement of barcode
labels anywhere on the PCB after printing.
This introduces traceability earlier in the line.
Enables neighboring SPI machine feedback
to adjust printer process parameters.
A software upgrade to Velocity mode
improves cycle time from 9 to 7 seconds
for the efciency of your production line.
Velocity+ pushes it to an even quicker
5-second cycle time with the same level of
accuracy.
The Wet/Dry/Vacuum cycle is performed
in a single pass, making cleaning faster,
more efcient and more economical (less
consumables: paper, solvent). Paper and
solvent level sensors allow you to anticipate
maintenance requirements. Paper change
per cassette (23 or 24”) takes just 14 seconds.
/
High Flexibility
►
Traceability: S-Track barcode
placement
►
Post print additive deposition
of paste and adhesive with
ADu+
►
Ideal for prototyping
►
Large print area
►
Faster quick-change cassette
system
►
Quick series changeover
Single-pass
cleaning system