OM-1646-001_w - 第12页
Safety Precautions Safe-3 OM-1646 2. Alert Indications in Instruction Manual The following summarizes the precautionary items and the location of alert indications in the instruction manual. Alert Indications described a…
Safety Precautions
Safe-2
OM-1646
1005-001
•
Identifying Alert Icons
: This symbol mark represents danger or prompts warning.
: This symbol mark represents prohibited operations.
: This symbol mark represents forced operations or instructions.
1. About Safety Precaution Labels
Safety Precautions
Safe-3
OM-1646
2. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Indications described as " "
Alert Description Related Items
Only a well-trained service person should perform maintenance
taskscarefully
throughthespeciedprocedures.
14.1.1 Notes on
Maintenance
Before maintenance work, shut off the power breaker and lock
the power breaker with the padlock.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its
substitute.
Alert Indications described as " "
Alert Description Related Items
The load power to the motors, etc., is turned OFF but the setup
operation must be performed carefully when you put your hand
insidethe
machine.Avoidhandandngerinjuries.
11.4Conrmation
of PCB Transfer
and Positioning
Even when the power breaker is set to "OFF", the primary line is
powered, making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before
maintenance work.
14.1.1 Notes on
Maintenance
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of
the dc power supply and the servoamplier go "OFF" in 10 minutes or
more after the power breaker is set to "OFF".
1005-001
2. Alert Indications in Instruction Manual
WARNING
CAUTION
Safety Precautions
Safe-4
OM-1646
1005-001
3. Alert Labels
The alert labels (described below) are used for this machine.
Please read the instructions on each label carefully and check the contents, observing the
actual object.
Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, contact our service department for
the replacement with a new one.
3. Alert Labels