OM-1646-001_w - 第21页
2 OM-1646 3. Automatic Operation This window enables you to view the current operation status and production condition such as the production model names (pattern program names), etc., and the information on the prospect…
1
OM-1646
1. Scope
In the dual transfer system, two lanes are used to transfer PCBs alternately,
assuming that the PCB transfer time is "0" (zero) and improving productivity.
Furthermore, this system can be used effectively to place components
simultaneously on different PCBs (for different models), reducing the
number of PCBs in the middle of processing and making it possible to make
appropriate production whenever necessary.
The transfer specications comply with the SMEMA transfer standards.
2. Rough View of Machine
Lane A
Lane B
Front Side of Machine
F1
1005-001
1. Scope
2
OM-1646
3. Automatic Operation
This window enables you to view the current operation status and production
condition such as the production model names (pattern program names), etc.,
and the information on the prospective number of nished PCBs and presumable
deterioration in the operation rate based on pickup errors, etc.
Reference
Refer to the Instruction Manual of the SIGMA-G5 for the information except for
dual transfer.
[1]
[2]
Automatic Operation F2
Graphic
Development
1005-001
3. Automatic Operation
3
OM-1646
[1] Graphic Display Area
The graphic image of the PCB transfer and component input sections is displayed in this area.
Graphic Display Area F3
Note
The displayed contents will differ depending on selection of the options.
Local/Line Change Buttons
Using these buttons, the graphic display section is changed.
Note
When the line consists of a single unit, the line control change button is
not displayed.
[Local] Button
: When this button is pressed, the graphic image of the single
machine is displayed.
[Line] Button
: When this button is pressed, the graphic image of the line is
displayed.
The line start or line stop after the completed PCB is
discharged from the line, is performed.
Reference
Refer to "3.1 Line Window" for the details.
1005-001
3. Automatic Operation