MEC-CP842-1.0E.pdf - 第50页
The Mach ine >> Sensor Positions 3-28 MEC-CP842-1.0E D2 T able (CP-842ME option) C746M1025 X099 X098 X0A2 X095 X0A1 X0A1 X09D X09C X097 X096 X0A0 X09E X09B X09A C746M1T07 X0CC X0CE X0CF X0D2 X0D3 X0D4 X0D5 X0D6 X0D…
The Machine >> Sensor Positions
MEC-CP842-1.0E 3-27
D1 Table (CP-842ME option)
X088
X08A
X081
X080
X086
X087
C746M1024
X083
X082
X07F
X08C
X08B
X08B
X085
X084
C746M1T16
X07F
X080
X081
X082
X083
X084
X085
X086
X087
X088
X08A
X08B
X08C
D1 CAM CYLINDER UPPER LIMIT CHECK
D1 TABLE STOPPER LOCK CHECK
D1 TABLE STOPPER UNLOCK CHECK
D1 PCU CLAMP CHECK ( 1 )
D1 PCU UNCLAMP CHECK ( 1 )
D1 PCU CLAMP CHECK ( 2 )
D1 PCU UNCLAMP CHECK ( 2 )
D1 PALLET ARRIVE CHECK
D1 PALLET SETTING CHECK ( 1 )
D1 PALLET SETTING CHECK ( 2 )
D1 PALLET PASS CHECK ( 1 )
D1 PCU SET CHECK
D1 CAM CYLINDER LOWER LIMIT CHECK
Sensor No.
SIGNAL NAME
The Machine >> Sensor Positions
3-28 MEC-CP842-1.0E
D2 Table (CP-842ME option)
C746M1025
X099
X098
X0A2
X095
X0A1
X0A1
X09D
X09C
X097
X096
X0A0
X09E
X09B
X09A
C746M1T07
X0CC
X0CE
X0CF
X0D2
X0D3
X0D4
X0D5
X0D6
X0D7
X0D8
X0D9
OUT-CARRIER FORWARD LIMIT PANEL CHECK
OUT-CARRIER FORWARD LIMIT CHECK
OUT-CARRIER RETRACT LIMIT CHECK
OUT-CARRIER RETRACT LIMIT CLAMP CHECK (FIXED RAIL)
OUT-CARRIER RETRACT LIMIT CLAMP CHECK (ADJUSTABLE RAIL)
OUT-CARRIER FORWARD LIMIT CLAMP CHECK (FIXED RAIL)
OUT-CARRIER FORWARD LIMIT CLAMP CHECK (ADJUSTABLE RAIL)
OUT-CARRIER RETRACT LIMIT UNCLAMP CHECK (FIXED RAIL)
OUT-CARRIER RETRACT LIMIT UNCLAMP CHECK (ADJUSTABLE RAIL)
OUT-CARRIER FORWARD LIMIT UNCLAMP CHECK (FIXED RAIL)
OUT-CARRIER FORWARD LIMIT UNCLAMP CHECK (ADJUSTABLE RAIL)
Sensor No.
SIGNAL NAME
Basic Operation >> Changing the Conveyor Width
MEC-CP842-1.0E 4-1
4. Basic Operation
4.1 Changing the Conveyor Width
Point
Conveyor width is adjusted simultaneously for the in-conveyor, XY-table, and out-con-
veyor. The conveyors should be adjusted to a width that permits smooth panel clamp-
ing and conveyance.
Procedure
1 Execute the necessary commands to link the XY-table to the in and out-convey-
ors. At the touch panel’s main screen, select the following commands: [Con-
veyor] - [Conveyor Width] - [Change Width], then press the START button.
2 Turn the handle on the out-conveyor to adjust the conveyor width until the
panel can be conveyed smoothly. First increase the conveyor width then reduce
it to 0.5~1.0 mm wider than the panel.
CAUTION
Before adjusting the conveyor width, check the back-up pin posi-
tions on the XY-table to prevent interference between back-up pins
and the adjustable rail.
C46M2001
Handle
C46M2002
W+(0.5~1.0)
(mm)
W
Panel