MEC-CP842-1.0E.pdf - 第80页
Maintena nce >> Lubrication 5-20 MEC-CP842-1.0E Grease Gun Kit A grease gun kit that can be used for almost all Fuji equipment is available from Fuji. The grease gun kit comes with most of the no zzles required to …
Maintenance >> Lubrication
MEC-CP842-1.0E 5-19
5.2 Lubrication
5.2.1 Precautions During Lubrication
• Prior to beginning any lubrication, turn the main power off at the breaker.
• Apply an appropriate amount of lubricant. If too much lubricant is applied, it
may splatter and drop on panels inside the machine. Special care should be
taken to keep the camera lens clean because a dirty lens results in poor part
inspection results. Use a lens cleaner to keep the lens clean.
5.2.2 Types of Lubricant
The necessary lubricants have the following characteristics.
Note: Do not mix lubricants.
C746M3T02
Daphne Eponex No. 2
Multemp SRL
AFC Grease
Lithium grease by Idemitsu suited to mid/low speed parts.
Lithium grease by Kyodo Yushi suited to high/mid/low speed parts.
Multemp LRL3
Lithium grease by Kyodo Yushi suited to mid/low speed parts.
High grade synthetic-base grease by THK suited to
high speed parts.
SHC 630
Turbine oil +
NASKALUBE
PAO-base oil by Mobil used for gears and bearings.
A Fuji special blend of oil containing additives for durability.
Characteristics
Type
Daphne
Super Multi Oil 32
High grade synthetic-base oil by Idemitsu used as a multi-purpose
lubricating oil applicable to a wide range of parts that require
lubrication.
Maintenance >> Lubrication
5-20 MEC-CP842-1.0E
Grease Gun Kit
A grease gun kit that can be used for almost all Fuji equipment is available from Fuji.
The grease gun kit comes with most of the nozzles required to inject grease into vari-
ous types of grease fitting. Please contact Fuji to obtain the grease gun kit.
Name: Fuji grease gun kit
Code: AWPJ820*
Grease gun kit contents:
No. Name Code
Format
Quantity
1
2
3
4
5
6
7
8
9
10
11
12
Box Sheet
Sheet
Sheet
Fitting
Grease Gun
Syringe
Rubber Hose
Air Hose
Nozzle
Nozzle
Nozzle
Nozzle
EA506J
PE light (Sponge)
Polyurethane
KH-120 (with HSP-1)
SJ-S30S
SPK-3C
TU0604B-310 mm
L-type
N-type
N-1-type
P-type
1
1
1
1
1
1
1
2
1
1
1
1
13
14
Nozzle
Tube
U-type
PTFE tube 2x3-150 mm
1
1
15
16
Connector
Connector Nipple
PN-1/8-PT1/8-BS
TS6-01
1
1
17 Sleeve 40-13
PJ
WPJ1271
WPJ1281
WPJ1261
K1153F
S2184A
H5456T
T2063H
N5004A
N5005A
N5006A
N5007A
N5008A
T2061E
K5030T
S2176B
S3084A 1
GRSKIT01E
Included Parts
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
GRSKIT02E
Maintenance >> Lubrication
MEC-CP842-1.0E 5-21
The CP-842E/842ME requires the following grease nozzles, which are not included in
the standard grease gun kit.
5.2.3 Lubrication Instructions
Illustrations and tables explain lubrication procedures by machine unit.
Type of Lubricant and Lubrication Schedule
Tables indicate the location, lubricant, and schedule for lubrication.
The lubrication schedules are based on eight hours of operation per day, five days per
week (40 hours) and 20 days per month (160 hours). If the machines are operating for
two or three shifts per day or more than 5 days per week, then the lubrication sched-
ules should be adjusted accordingly.
Daily: Eight hours from when the machine is turned on. (After every
eight hour shift.)
Weekly: After 40 hours of operation. (Five days if the machine is oper-
ating one shift per day.)
Monthly: After 160 hours of operation. (One month if the machine is
operating one shift per day.)
Every 3 months: After 480 hours of operation. (Three months if the machine
operating one shift per day.)
Every 6 months: After 960 hours of operation. (Six months if the machine is
operating one shift per day.)
Annually: After 1920 hours of operation. (One year if the machine is
operating one shift per day.)
C746M3039Ea
Nozzle for NG parts disposal
unit and NY-axis LM blocks
DGPJ055*
ADGPJ818* DGPJ600*
Nozzle for NZ-axis LM blocks 6WDG