MEC-CP842-1.0E.pdf - 第99页
Maintenance >> Lubrication MEC-CP842-1.0E 5-39 5.2.19 Lubricating the Index Unit Point The lubricant for the inde x units is containe d within the oil cooler on the left side of the cam box. Replace the oil in the …
Maintenance >> Lubrication
5-38 MEC-CP842-1.0E
5.2.18 Lubricating the Rear Cover
Arrows in the illustration indicate lubrication points.
Note: The above drawing shows the CP-842ME. Lubricate the CP-842E in the same way.
C746M3T16
50
Daphne Exponex No. 2 Every 3 months
Lubrication points
Schedule
Types of lubricant
Slide rail
C746M3029
(50)
(50)
(50)
(50)
(50)
(50)
(50)
(50)
Maintenance >> Lubrication
MEC-CP842-1.0E 5-39
5.2.19 Lubricating the Index Unit
Point
The lubricant for the index units is contained within the oil cooler on the left side of
the cam box. Replace the oil in the oil cooler once every three years or after 12,000
hours of operation.
Procedure
Drain the oil in the oil cooler from three locations. Refer to the diagram below for how
much oil should flow from each drain plug.
Prepare in advance a container for collecting the old oil, and a plastic sheet and card-
board to cover the machine.
C746M3T17
51
SHC 630
Every 3 years or
12,000 hours
Oil cooler
Lubrication points
Schedule
Types of lubricant
C746M3030
(51)
Oil cooler drain plug
(approx. 2,000 ~ 3,000cc)
Oil inlet
Nozzle index drain plug
(approx. 1,000cc)
Theta (Q) index drain plug
(approx. 1,000cc)
Maintenance >> Lubrication
5-40 MEC-CP842-1.0E
1 Remove the acrylic cover from the top of the machine and remove the cap from
the oil cooler.
2 Open the cover on the rear left of the machine.
3 Remove the old cooler oil using the drain plug. Protect the area surrounding the
drain plugs using a plastic sheet, remove the drain plug, and drain the oil into a
container.
Note
1. Cover the machine carefully when draining the oil cooler
2. The oil removed from the machine should be discarded in accordance with local ordinances
for handling waste matter.
4 Replace and properly tighten the drain plug after the oil has been removed.
5 Open the doors at the rear center of the machine.
C746M3031
<CP-842E> <CP-842ME>
Clear acrylic cove
r
Clear acrylic cover
Cap
Oil cooler
Drain plug
C746M3032
Drain plug
Plastic sheet