2500_Users_Manual - 第425页
I ndex ProM aster 25 00 User Manua l Inde x-1 A Absolute addressin g, 3-17 Adapter, air connection, 2 -4 ADC optic adjus ting val ue, 5-34, B-2 adjusting, dot matrix print er, 5-34 adjusting , thermal printer, 5-35 label…
Local Mode
F-12 ProMaster 2500 User Manual
The 2500 displays:
Press
1
. The 2500 displays:
The
C
in the displays represents the category signal sent by TaskLink (or
any computer remote control driver program) to indicate the result of the
last programming operation. In the example above, a
C1
signal from
TaskLink indicates that the device passed.
BIN 1
represents output tube
holder 1 and
BIN 2
represents output tube holder 2. When TaskLink send
a C1 signal, the 2500’s beam takes the device to the labeler (if the Task has
label selected as part of the current process) and then places that device in
output track 1.
For a device that has had a programming error, TaskLink might be
configured to send a C2 to the 2500. The 2500 would not label the failed
device and would send it to output bin 2, which is output tube 2.
This is the default setting for the binning control setup. Notice that in the
second line for all failures, there is no
X
after
Label
in the second line of
the display above. If labeling has been selected in the Task, this
unselected option instructs the 2500 not to label a device that has failed. If
you find that the 2500 is labeling failed devices, check to see that someone
has not inadvertently placed an X after Label in the second line. The 2500
will not label passing devices with one label text and failing devices with
different label text.
Control Functions
This command is used in conjunction with the Program/Test Only and
Program/Test and Label commands under the Operations menu. These
commands are used by Data I/O service personnel only and are not
usable under normal operation.
* * * HANDLER SETUP MENU * * *
1 - BINNING
2 - CONTROL FUNCTIONS
3 - SETUP MENU
BIN 1=C1-X C2- C3- C4- C5- LABEL-X
BIN 2=C1- C2-X C3-X C4-X C5-X LABEL-
I
ndex
ProMaster 2500 User Manual Index-1
A
Absolute addressing, 3-17
Adapter, air connection, 2-4
ADC optic
adjusting value, 5-34, B-2
adjusting, dot matrix printer, 5-34
adjusting, thermal printer, 5-35
label calibration, 5-7
positioning, 5-7
roller assembly, 5-15, 5-17
super optic collector, A-5
Adjusting
ADC optic, dot matrix printer, 5-34
ADC optic, thermal printer, 5-35
ADC value, 5-34, B-2
dot matrix print head gap, 5-24
dot split, 2-26
label placement, 2-25, 5-25
label print position, 5-25
label print position, thermal printer, 5-26
labels, 5-25
print intensity, thermal printer, 2-29
print quality, dot matrix printer, 2-22
thermal printer, 5-27
track, 5-64
track air, 4-38
track width, 4-12
Air
handler input, 4-17
input requirements, 2-2
Air filter, external, 2-5
Air flow, system, 5-9
Air gauges, setting, 2-7, 4-17
Air input, pressure, 4-17
Air line
adapter, 2-4
connection, 2-5
disconnecting, 2-6
Air pressure
adjusting, 2-7
adjustment knobs, 1-4
recommended settings, 2-5
Alarm, audible, setting, F-9
Algorithm-specific error message, 6-2
Aligning device
to DIP/SOIC/32-pin PLCC module, 4-31
to PLCC module, 4-27
Anti-backlash nut, replacement, 7-24
Antistatic precautions, 4-4
Antistatic wrist strap, 5-50
Application plate, checking the height, 2-9
Attachment, 8-pin 150 mil SOIC device, 4-14
Audible alarm
about, 2-21
setting, F-9
Automatic RAM fill command, 3-18
Auto-Select, 3-11
Index
Index-2 ProMaster 2500 User Manual
B
Baud rate
changing 2500 ports, F-9
default, E-2
setting on 2500, 2-21
Beam
aligning, 4-27
lead screw lubrication, 5-62
stall and motor speed, B-3
stalling described, 5-8
stalls, 5-22
theory of operation, 5-8
Beam gasket replacement, 7-25
Beam head rotation motor replacement, 7-14
Beam optic malfunction message, 6-2
Beam traverse motor replacement, 7-14
Bearing plate, checking the height, 2-9, 5-26
Blank check, 3-8, 5-5, 6-3
Board
pin driver, 5-20
power supply, 5-19
relay, 5-19
Bulletin Board Service, xx
Button
CAL, 1-10
E-stop, 4
START, 1-10
C
Calibrating labels
dot matrix labeler, 2-11
theory of operation, 5-15, 5-17
thermal printer, 2-14
Calibration
label detection optic, 4-19
PE, 5-20
setting, label, 5-25
value, label, B-4
Capacitor configuration error message, 6-2
Categories
see Handler sorting
Category X bin not available message, 6-2
Changing your address, xxii
Characters per inch
dot matrix printer, 5-15
thermal printer, 5-17
Chart, chuck selection, 4-16
Check boxes, 1-14
Checking communication, TaskLink, 2-19
Chuck
about, 1-9
installing, 2-8, 4-16
replacing the tip, 4-17
selection chart, 2-8, 4-16, 4-17
theory of operation, 5-8
tips, cleaning, 5-56
Cleaning
application plate, 5-57
beam, 5-61
chuck tips, 5-56
DIP modules, 5-56
label path, dot matrix printer, 5-57
optic holes, 5-56
periodic, 5-56
pinch rollers, 5-57
programming module, 5-57
SOIC modules, 5-56
SPA block, 5-56
2500 exterior, 5-56
Command set, remote mode, E-4—E-9
Communications test, 5-49
Compensated vector test, 3-13
Computer remote control
command set, handler, E-2
default settings, E-18
firmware key, B-2
halting an operation, E-17
overview, E-1
programmer electronics summary, E-18
programming electronics setup, E-17
Remote port setup, E-2
software driver, E-1
standard vs. extended commands, E-19
Configuration blocks, 4-8
Configuration chart, programming module, 4-10
Configuring the programming module, 4-8
Connecting
source air line, 2-5
2500 to PC, 2-16
Continuity test fail, 5-4
Controller board
about, 5-19
replacement, 7-20
theory of operation, 5-13
Controller power supply, replacement, 7-19
CPI (Characters Per Inch), 5-15
CRC Error Codes, E-22
Creating a new file, F-7
Creating label text, 3-11
Customer Resource Center, phone number, 1-19
Customer Support, xvii
Cycle parts, 5-42