SM-131-006.pdf - 第14页
Safe-9 Safety Precautions 0506-002 When the green lamp of the light tower is ON or flickering (ON and OFF), it indicates that the static machine is in the "Automatic" mode (standby mode). CAUTION In case of a d…
Safe-8
Safety Precautions
Notes on Maintenance (continued)
0506-002
z Confirm that the "LOCK" lamp (green) is ON before
operating the machine.
z If the "LOCK" lamp on the operation panel is not turned ON,
the machine can be operated at any time from both front and
rear sides, endangering the operators around the machine.
z Before performing any maintenance work, etc., with the
machine powered, be sure to press the [PNL CHANGE]
button on either the front or the rear operation panel and
confirm that the "LOCK" lamp is turned "ON".
When there is a problem with the machine, locate the cause
and assess the condition. Set the power breaker to "OFF".
After the problem has been rectified completely, reset the
machine to its normal condition.
WARNING
Residual voltages may remain behind for a few minutes in the
internal devices of the machine after power interception.
Touch the internal devices carefully. Otherwise, electric shock
can result from direct contact with live conductors.
Safe-9
Safety Precautions
0506-002
When the green lamp of the light tower is ON or flickering (ON and
OFF), it indicates that the static machine is in the "Automatic" mode
(standby mode).
CAUTION
In case of a disaster of any kind, earthquake, storm, flood, fire, or
lightning, immediately stop the machine and turn off the power
supply.
Notes on Maintenance (continued)
CAUTION
Do not use any unspecified feeders.
When the machine stops due to a component pickup error, be sure to
remove the mispicked component from the feeder and start the
automatic operation.
Safe-10
Safety Precautions
0506-002
3. Alert Labels
The alert labels (described below) are used for this machine.
Please read the instructions on each label carefully and check the contents, observing the
actual object.
Be sure to follow the instructions for safety purposes.
These labels should be kept clean and easily legible at a far safe distance.
When a label has deteriorated and become illegible, replace it with a new one.
Location of Alert Labels
The alert labels are affixed on dangerous and caution-required areas.
Refer to "Alert Labels and Description" for details.
(5)
(8-1)
(14)
(17)
(7)
Front Side