SM-131-006.pdf - 第207页

Device Name Chip Mounter Block Name Page No. Unit Name Revision Model Item GXH-1 Chapter 11 Recognition Section 2. Replacement of Co mponent Recognition Camera 2.2 Attachment of Component Recognition Camera (1) Attach th…

100%1 / 325
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model ItemGXH-1
Chapter 11 Recognition Section
2. Replacement of Component Recognition Camera
2.1 Detachment of Component Recognition Camera
(1) Detach the lighting section for the component recognition camera.
Remove the four bolts (M5L20) and loosen the two bolts (M5L45).
(2) Detach the component recognition camera. (Camera Assembly)
The camera and scope sections are assembled together. Detach the connector (camera
cable and coaxial lighting) and take out the assembly. (Figs. K12 and K13)
0406-001
11-5
Fig. K12 Component Recognition Camera
M5L20
M5L45
Lighting Section
Fig. K13 Camera Directed toward Machine Side
Ring Lighting
Coaxial Lighting
Attachment of
Name Plate
Scope Section
Camera Section
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model ItemGXH-1
Chapter 11 Recognition Section
2. Replacement of Component Recognition Camera
2.2 Attachment of Component Recognition Camera
(1) Attach the component recognition camera. (Camera Assembly)
Positioning pins are used in the frame for camera attachment. Place the camera assembly
along the positioning pins. (Fig. K14)
(2) Connect the connector (camera cable and coaxial lighting).
(3) Attach the four bolts (M5L20) and tighten the two bolts (M5L45) to attach the lighting
section for the component recognition camera. (Fig. K12)
(4) Execution of Teaching Operation on Component Recognition Camera Offset
Perform the "Magnification Teaching" and "Offset Teaching" operations in "Offsets of
Component Recognition Camera".
0406-001
11-6
Fig. K14 Camera Positioning
Positioning Pins
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model ItemGXH-1
Chapter 11 Recognition Section
2. Replacement of Component Recognition Camera
2.3 Attachment of Component Recognition Camera Unit
Attach the component recognition camera unit (Fig. K15) along the positioning pins on the
main body with four bolts (M8L30 SW, FW). (Figs. K16 and K17)
M8L30
M8L30
Fig. K15 Component Recognition Camera Unit
Front Side of Machine
Jig Holder
Ring Lighting
Coaxial Lighting
Direction of Camera Installation
(Name Plate Attachment Side)
Fig. K16 Direction of Component Recognition Camera Unit Attachment
Direction of Camera Installation
(Name Plate Attachment Side)
Direction of Camera Installation
(Name Plate Attachment Side)
Direction of Camera Installation
(Name Plate Attachment Side)
0406-001
11-7