SM-131-006.pdf - 第253页

Device Name Chip Mounter Block Name Page No. Unit Name Revision Model Item GXH-1 Chapter 15 Others 2. Attachment of Operation Monitor (4) Select the [Block2] and [STP] buttons a nd then the "Output Chk" tab. (F…

100%1 / 325
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model ItemGXH-1
Chapter 15 Others
2. Attachment of Operation Monitor
2.7 Operation Check
Supply power to the machine and check operation of the monitor after the attachment.
(1) Open the "I/O DIAG" window shown in Fig. O9. (Operation Sequence: [SUPERVISOR]
Button → [MAINT] Button → [DVC CHECK] Button)
Follow the steps below to check operation of the front operation monitor after the
attachment. The same steps must be followed fro the rear operation panel.
(2) Select the [Block2] and [PNL] buttons and then the "Output Chk" tab.
(3) Select "D8" through "D12" (Bits) individually. Press the [ON] button in the "Control
Sw" group box and check the ON/OFF status of the object LED.
When the LED on the "Block4" side is turned ON, it indicates that a wrong cable is
connected.
Bit Selection
Fig. O9
0406-001
15-3
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model ItemGXH-1
Chapter 15 Others
2. Attachment of Operation Monitor
(4) Select the [Block2] and [STP] buttons and then the "Output Chk" tab. (Fig. O10)
(5) Select an arbitrary "Bit" and press the [ON] button in the "Control Sw" group box. Check
if a vacuum sound can be heard from the head on the objective side.
When a vacuum sound can be heard from the head on the "Block4" side, it indicates
that a wrong cable is connected.
(6) Follow the same steps as (2) through (5) to check operation of "Block4".
In the case of "Block4", the window in Fig. O9 cannot be used to check "START",
"PNL CHANGE", and "LOCK".
(7) When the results of the checking are normal, this work is completed.
0406-001
15-4
Bit Selection
Fig. O10
Chapter 16
Consumables and Important Servicing Parts
This chapter describes the consumables and important
servicing parts.
• List of Consumables
• List of Important Servicing Parts
0406-001 16-A