SM-131-006.pdf - 第264页
Device Name Chip Mounter Block Name Page No. Unit Name Revision Model Item GXH-1 Chapter 17 Servo Alarm 1. Troubleshooting on Servo Alarm • Reset Procedure from "ERROR" Window (1) Take notes of the descriptions…
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model Item GXH-1
Chapter 17 Servo Alarm
1. Troubleshooting on Servo Alarm
[4] Date and Time
Displayed are the date and time of error occurrence.
[5] Number of Pages
Displayed are the total number of pages and the number of the current page.
Example: (3/5)
Total Number of Pages : 5
Current Page : 3
[6] Error-Caused Axis Name
Displayed is the name of the axis on which a servo alarm has occurred.
Refer to "1.2 List of Servo-Alarm-Caused Axes Names" for each axis on which a
servo alarm has occurred.
[7] Contents of Servo Alarm
Displayed are the contents of the servo alarm (alarm generated by the servoamplifier)
and the alarm record (hexadecimal number).
Refer to "1.4 Servo Alarm Remedy Table" for the contents of servo alarms.
[8] Contents of Operational Alarm
Displayed are the contents of the operational alarm (alarm generated by the motion
controller) and the alarm record (hexadecimal number).
Refer to "1.5 Operational Alarm Remedy Table" for the contents of operational
alarms.
[9] [Prev] and [Next] Buttons
[Prev] Button : When pressed, this button opens the previous page.
[Next] Button : When pressed, this button opens the next page.
[10] [Clear Alarm] Button
When pressed, this button cancels an alarm (sound) only.
[11] [RETURN] Button
When pressed, this button cancels an alarm (sound) and closes the "ERROR" window.
The original window resumes.
[12] [Minimize] Button
When pressed, this button minimizes the "ERROR" window and moves to the bottom
left of the window.
Double-click the minimized window to return it to the size before it was minimized.
17-2
0506-001
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model Item GXH-1
Chapter 17 Servo Alarm
1. Troubleshooting on Servo Alarm
• Reset Procedure from "ERROR" Window
(1) Take notes of the descriptions under "Error ID", "ITEM", "DESCRIPTION", "Error-
Caused AXIS Name", "CONTENTS OF SERVO ALARM", and "CONTENTS OF
OPERATIONAL ALARM".
When you have forgotten an error message, refer to the list of errors in the "Machine
Error Recall" window. (Operation Sequence: [RECALL MSG.] Button (Submenu)
→ "Machine Error Recall" Window).
(2) Press the [RETURN] button to resume the original window.
(3) Use the error ID and the contents of the servo and operational alarms as indices and refer
to "1.4 Servo Alarm Remedy Table" or "1.5 Operational Alarm Remedy Table" for
correct remedial procedures.
17-3
0506-001
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model Item GXH-1
Chapter 17 Servo Alarm
1. Troubleshooting on Servo Alarm
1.2 List of Servo-Alarm-Caused Axis Names
Error-Caused
Axis Name
Name
Servoamplifier
Type
Remarks
Block X Axis Beam X Axis MR-J2S-B
Block：Blocks 1 to 4
Block Y1 Axis Beam Y1 Axis MR-J2S-B
Block：Blocks 1 to 4
Block Y2 Axis Beam Y2 Axis MR-J2S-B
Block：Blocks 1 to 4
Block DD Axis High-Speed Head Head
Rotational Axis
MR-MD08
Block：Blocks 1 to 4
Block NS Axis High-Speed Head Nozzle
Selection Axis
MR-MD08
Block：Blocks 1 to 4
Block NL Axis High-Speed Head Nozzle U/D
Axis
MR-MD08
Block：Blocks 1 to 4
Block HL Axis High-Speed Head Head U/D
Axis
MR-MD08
Block：Blocks 1 to 4
Conveyor NL-L
Axis
Conveyor L Transfer Axis MR-MD18
Conveyor NL-W1
Axis
Conveyor L Conveyor Width 1
Axis
MR-MD18
Conveyor NL-W2
Axis
Conveyor L Conveyor Width 2
Axis
MR-MD18
Conveyor NA-L1
Axis
Conveyor A Transfer 1 Axis MR-MD18
Conveyor NA-B1
Axis
Conveyor A Backup 1 Axis MR-J2S-B
Conveyor NB-L1
Axis
Conveyor B Transfer 1 Axis MR-MD18
Conveyor NB-W1
Axis
Conveyor B Conveyor Width 1
Axis
MR-MD18
Conveyor NB-W2
Axis
Conveyor B Conveyor Width 2
Axis
MR-MD18
Conveyor NC-L1
Axis
Conveyor C Transfer 1 Axis MR-MD18
Conveyor NC-B1
Axis
Conveyor C Backup 1 Axis MR-J2S-B
Conveyor NR-L
Axis
Conveyor R Transfer Axis MR-MD18
Conveyor NR-W1
Axis
Conveyor R Conveyor Width 1
Axis
MR-MD18
Conveyor NR-W2
Axis
Conveyor R Conveyor Width 2
Axis
MR-MD18
Block CUT Axis Cutter Axis MR-J2S-B
Block：Blocks 1 to 4
17-4
0506-001