SM-131-006.pdf - 第28页
Safe-23 Safety Precautions No. Alert Labels and Description (20) Description z Keep your hands away from the cutter blades while cleaning, lubricating, or adjusting the cutter section. Otherwise, it will result in a hand…
Safe-22
Safety Precautions
No. Alert Labels and Description
(16)
Description
z Attach the nozzles correctly in the nozzle stockers (housings).
Do not operate the machine with a nozzle being left on the nozzle stocker shutter.
Otherwise, the machine will break down.
(17)
Description
z Pay attention to the moving mechanisms.
Part of your body may be trapped in the moving mechanisms and will be given an
injury.
(19)
Description
z Do not put any feeder sideways nor tools on the feeder bases. Otherwise, the
machine will break down.
0506-002
Safe-23
Safety Precautions
No. Alert Labels and Description
(20)
Description
z Keep your hands away from the cutter blades while cleaning, lubricating, or
adjusting the cutter section. Otherwise, it will result in a hand injury, etc.
(21)
Description
z Only well-trained service personnel shall replace the cutter blades. Otherwise, a
hand injury, etc., will result.
0506-002
Safe-24
Safety Precautions
4. Precautionary Items for Correct Operations
Requirements for Installation
Be sure to fulfill the following requirements for safety purposes.
• Overvoltage Category : Category III
• Pollution Degree : 3
z Overvoltage Categories refer to the level of Impulse Withstand Voltage protection
provided at the specified Pollution Degree.
Category III : Primary circuits of a device to which power is directly
supplied from the power distribution panel, and circuits from
the distribution panel to outlets.
The term was changed from "Installation Category" to "Overvoltage
Category".
z "Pollution Degree" is a degree of pollution severity.
Pollution Degree 3: Conductive pollution or dry nonconductive pollution
that becomes conductive due to condensation occurs.
To be found in industrial environment or construction
sites (harsh environments).
Note
0506-002