SM-131-006.pdf - 第300页

Device Name Chip Mounter Block Name Page No. Unit Name Revision Model Item GXH -1 Chapter 18 Pack aging 1. Checklist for Pack aging 1.1 Checklist for Packaging Work • Perform the pack aging according to the checklist. Ch…

100%1 / 325
0512-001 18-B
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model Item GXH-1
Chapter 18 Packaging
1. Checklist for Packaging
1.1 Checklist for Packaging Work
• Perform the packaging according to the checklist.
Checklist for Packaging
No Description Check Remarks
1
Check if no screws have fallen or
are loosened.
Visual Checking Acceptable
2 Check if the covers are attached. The accessory cover is excluded.
3
Detachment of Nozzle Stocker
(Housing)
Refer to "1.3 Accessory Parts List" for
details.
4
Perform a zeroing operation before
the power is turned off.
Target Width: 460 mm
5
Attachment of Metal Fixtures for
Conveyor
Refer to "1.2 Checklist for Metal Fixture
Detachment" for details.
6
Application of Anticorrosion Oil
(DAPHNE EPONEX GREASE
No. 1)
Apply anticorrosion oil to the accessible
area of the linear guide.
7 Fixation of Head Section
8 Application of Anticorrosion Oil Apply anticorrosion oil all over the areas.
9
Check if the shutdown operation is
executed before the power is turned
off.
Be sure to go through the shutdown
sequence before the power is turned off.
10
Detachment of Power Supply and
Air Hoses
Avoid any electric shock.
11
Detachment of Cart Guide
Put orientation marks - "Rear Left 1",
"Front Left 2", "Rear Right 3", and "Front
Right 4".
12
Detachment of Backup Base
"Left NA" and "Right NC" shall be
indicated.
Refer to "1.3 Accessory Parts List" for
details.
13
Detachment of Light Tower and
Arrow Lamp
Wrap acetate tape around the wires more
than twice.
Refer to "1.3 Accessory Parts List" for
details.
14
Detachment of Operation Panels and
Front & Rear Keyboards
"L" and "R" (viewed from the front side
of the machine) shall be indicated on the
101 and 102 wires.
Use a special jig to disconnect the
connectors from the operation panel.
Refer to "1.3 Accessory Parts List" for
details.
18-1
0512-001
Device
Name
Chip Mounter
Block Name
Page No.
Unit Name
Revision
Model Item GXH-1
Chapter 18 Packaging
1. Checklist for Packaging
No Description Check Remarks
15
Wrap the connectors with bubble
wrap bags.
After packaging with bags, bundle and tie
them together.
16
Detachment of PCB Connector from
Touch Screen with Jig
Check for any damages after detachment.
17 Checking of Cart Stopper Rubbers Attach the stopper rubbers if disengaged.
18 Fixture of Partition Fixture with Filament Tape
19
Fixation of Feeder End Positioning
Block
Fix the tape through the lower side of the
feeder base.
20 Fixation of Bar Fixture with Filament Tape
21 Attachment of Casters
22
Check how the wing bolts of the
casters are tightened.
Put paint marks after tightening the bolts.
23 Locking of Bolts for Pedestals Lock them by screwing.
24
Fixation of LAN and Keyboard
Cables
25
Confirm that no tool is left behind
inside the machine.
26
Confirm that no unidentifiable part
is left behind after packaging.
27
Confirm that all items in the
accessory parts checklist are
checked.
(incl. the instruction manuals)
18-2
0512-001