SM-131-006.pdf - 第316页

Chapter 19 Maintenance Checking List This chapter describes the Checking List for maintenance and inspections work. • GXH Series Maintenance Checking List 0602-001 19-A

Device

Name

Chip Mounter

Block Name

Page No.

Unit Name

Revision

Model Item GXH-1

Chapter 18 Packaging

2. Packaging Procedure

(3) Take out the machine.

• When a crane is used, make use of the four lifting lugs to lift the main body.

Be sure to use a joiner to connect a chain or a wire with the lifting lug.

The length of the chain or the wire shall be such length that will not cause the

chain or the wire at full tension to touch the machine

Fig. R16

• When a forklift is used, insert the forks (platform) from the front side of the machine

so that they will not touch the adjust bolts located at the lower area of the machine

and lift the machine.

(4) While the machine is being lifted up,

attach a special caster (4 pcs. in total)

to the lower area of each lifting lug.

Fig. R17

Lifting Lugs

Joiners

Connection of Chain or Wire with Lifting Lug

18-16

0512-001

Chapter 19

Maintenance Checking List

This chapter describes the Checking List for maintenance

and inspections work.

• GXH Series Maintenance Checking List

0602-001 19-A

0602-001 19-B