SM-131-006.pdf - 第39页

Safe-34 Safety Precautions 0506-001

Safe-33

Safety Precautions

0506-001

z Before performing a test run, it is required to set parameters to control the

variations in the movement based on the results of detection during the

operation.

Execute a test run for the running-in and performance check of the machine.

Before performing a test run, make the following settings in the "Test Mode" window

to prevent the machine from being activated in an unexpected way.

z Tick the "Missing Cmpnt Det Disabled", "Vertical Cmpnt Det Disabled", and

"Cmpnt Recog Pseudocomm" check boxes in the "Test Mode" window.

z Set parameters to prevent the machine from being set in the "Component

Replenishment", the "Recovery", or the "Alternate" mode.

Special caution should be paid to your maintenance work when test run

is performed with the covers being opened or the sensors being

deactivated.

z Be sure to keep your body away from the movable range of the machine

during operation.

z Do not disable the interlock unless absolutely necessary.

It is very dangerous if your work requires you to disable the interlock of the machine.

If the interlock has been disabled then always return it to enable as soon as possible.

z Confirm that no current is flowing in the power cable (to be connected to the

machine) with a tester at the delivery, the installation, or the transfer of the

machine.

Note

Safe-34

Safety Precautions

0506-001

Contents

Page

Cont-1

Before Use ............................................................................................ 1

Safety Precautions

1. About Safety Precaution Labels .....................................................Safe- 1

2. Common Precautionary Items .......................................................Safe- 3

Basic Precautions ............................................................................Safe- 3

Notes on Installation, Transfer and Maintenance ..............................Safe- 4

Precautions before Maintenance ......................................................Safe- 5

Notes on Maintenance ......................................................................Safe- 7

3. Alert Labels ....................................................................................Safe-10

Location of Alert Labels.....................................................................Safe-10

Alert Labels and Description .............................................................Safe-17

4. Precautionary Items for Correct Operations ..................................Safe-24

Requirements for Installation ............................................................Safe-24

Precautionary Measures before Installation ......................................Safe-25

Power Supply ....................................................................................Safe-26

Air Supply ..........................................................................................Safe-27

Data Backup Operation ....................................................................Safe-27

Computer Viruses ............................................................................Safe-27

Power Failure ...................................................................................Safe-28

Built-In Computer ..............................................................................Safe-28

Note on Startup Operation (Running-In Operation)...........................Safe-28

5. Safety and Health Standard ...........................................................Safe-29

Contents ................................................................................................Cont- 1

0506-002