EPL6127110_YS12PF_Ope_E - 第50页
1-13 1 Part names and functions 4.1.2 YS12F T he YS12F has two 24-feeder plates (fixed feeder plates or feeder exc hange carriages) on the front side and one 60-feeder plate fixed on the rear side of the machine. If an A…
1-12
1
Part names and functions
4. Component supply section
The feeder setup section is equipped with feeder plates for installing feeders such as tape feeders, and
power supply connectors and air connectors for driving optional units. An auto tray changer (ATS15) can
also be installed on the rear of the YS12F as an option.
4.1 Supplying components from feeder plates
Tape feeders and stick feeders are installed on the feeder plate(s), and operate by electric power supplied from
the mounter.
4.1.1 YS12P
The YS12P has only one 60-feeder plate fixed on the front side of the machine.
YS12P feeder plate section
Fixed 60-feeder plate
Safety cover
Air connector
Power supply connector
Power supply connector (for dump station)
60-feeder plate
23108-L6-00
Power supply connector
When using optional units such as stick feeders, plug the power cord into these connectors.
Air connector
Use these air connectors when using an optional device such as an air blow gun. Connect the air tube (outer diameter
4mm) to supply compressed air to the optional device from the mounter.
n
Head No. and feeder set No.
Some feeders cannot be reached by a head depending on the head assembly configuration and X-axis movement range.
The tables below show feeder set numbers that can be accessed by each head of the machine.
Type Layout Head No. Accessible feeder set No.
Number of feeders than can be
attached
Front
60-feeder
plate
(fixed)
1 60
1 10 to 60
59 when 8mm feeders are used
2 8 to 58
3 6 to 56
4 4 to 54
5 2 to 52
n
NOTE
Accessible feeder positions may differ from the above when the Feeder Definition parameter in component
information is set to "Teach" or "Relative".
1-13
1
Part names and functions
4.1.2 YS12F
The YS12F has two 24-feeder plates (fixed feeder plates or feeder exchange carriages) on the front side and one
60-feeder plate fixed on the rear side of the machine. If an ATS15 is installed on the rear side, the 60-feeder
plate is demounted.
YS12F feeder plate section
24-feeder plates fixed on front side
Safety cover
24-feeder plate
23108-L7-00
n
Head No. and feeder set No.
Some feeders cannot be reached by a head depending on the head assembly configuration and X-axis movement range.
The tables below show feeder set numbers that can be accessed by each head of the machine.
Type Layout
Head
No.
Accessible feeder set
No.
Number of feeders
than can be attached
Front Rear
Front 24-feeder plate
(fixed) × 2
(Fixed feeder plates
or feeder exchange
carriages)
Rear 60-feeder plate
(fixed)
1
24
25
48
160
101
1 10 to 48 101 to 151
Front：47
Rear：59
(When 8mm feeders
are used)
2 8 to 46 103 to 153
3 6 to 44 105 to 155
4 4 to 42 107 to 157
5 2 to 40 109 to 159
n
NOTE
Accessible feeder positions may differ from the above when the Feeder Definition parameter in component
information is set to "Teach" or "Relative".
1-14
1
Part names and functions
4.1.2 Feeder exchange carriage
The feeder exchange carriage allows feeder setup in advance for the next production boards. The feeders on
the feeder exchange carriage can be changed at one time.
n
Feeder exchange carriage
External view of feeder exchange carriage
1
2
4
6
5
3
Placing 7-inch reels continuously
A tape reel larger than 7 inches
23118-L7-00
1. Handle
Use this handle to move and position the feeder exchange carriage.
2. Feeder plate
Up to 24 SS feeders (8mm) can be installed on this feeder plate.
3. Vertical clamp bolts
If necessary to adjust the feeder plate height, loosen these bolts and change their clamping positions. (8 places)
4. Empty tape dump box (option)
This box is for catching empty tape after components have been picked up.
5. Height adjustment bolt
After loosening the vertical clamp bolts, turn this bolt to adjust the feeder plate height.
6. Reel holder
Each reel holder holds one tape reel (7 inches) for 8mm tape feeders.
When using a tape reel larger than 7 inches, raise this reel holder as shown above.
c
above.