PSR_SIPLACE Setup Center 8.0 SP1.pdf - 第13页
ASM Assembly Sy stems GmbH & Co. KG SIPLACE Setup Ce nter 8.0 SP1 Status Nove mber 2015 Document: Author: PSR_SIPLACE Setup Center 8 .0 SP1.docx Stéphane Le Roux Template Version: 1.0 13 / 19 Print date: 07. December…
ASM Assembly Systems GmbH & Co. KG SIPLACE Setup Center 8.0 SP1 Status November 2015
Document: Author:
PSR_SIPLACE Setup Center 8.0 SP1.docx Stéphane Le Roux
Template Version: 1.0
12/ 19 Print date: 07. December 2015
Copyright (C) ASM Assembly Systems GmbH & Co. Kg 2011 All rights reserved Confidential
6. Marketing Strategy
SIPLACE Setup Center 8.0 SP1 is the successor of SIPLACE Setup Center 7.1.
Setup Center 8.0 SP1 is ready for deployment in each region and for standard installations.
Standard installation is defined as a stand-alone solution quoted by sales and installed by service.
Integrated installations (integration of SIPLACE network in a customer network) have to be quoted and
installed with Project Manager. In most cases, this will involve installing stand-alone solutions as a first step
and then the integrated solution as a second step.
Important during the introduction phase:
Contact the regional service manager to discuss the needs of the customer.
Service must be included in the customer discussions concerning any configuration, ramp up,
installation and training.
Training must be sold.
Service will use a working list/questionnaire to aid in understanding and documenting the customer
needs.
The full SIPLACE Setup Center questionnaire has to be stored in SIEBEL
The SIPLACE Setup Center questionnaire is available in SIPLACE DMS.
ASM Assembly Systems GmbH & Co. KG SIPLACE Setup Center 8.0 SP1 Status November 2015
Document: Author:
PSR_SIPLACE Setup Center 8.0 SP1.docx Stéphane Le Roux
Template Version: 1.0
13/ 19 Print date: 07. December 2015
Copyright (C) ASM Assembly Systems GmbH & Co. Kg 2011 All rights reserved Confidential
7. Compatibility
7.1. Supported Programming System
SIPLACE Pro
Setup Center 7.1
5.0 SP1
5.2
7.0
8.0
9.x
10.x
11.x
12.x
13.0 SP1
7.2. Supported Station Software
Unforced setup verification
Forced setup verification
10x.x
not supported
401.x, 402.x, 403.x, 406.x
not supported
407.05 Hotfix 9 (recommended)
407.05 Hotfix 9
408.x
not supported
501.x, 502.x, 503.x, 504.x
not supported
505.05 SP2 HF3 (recommended)
505.05 SP2 HF3
60x.x
605.03 SP5
70x.x
703.xx or higher
ASM Assembly Systems GmbH & Co. KG SIPLACE Setup Center 8.0 SP1 Status November 2015
Document: Author:
PSR_SIPLACE Setup Center 8.0 SP1.docx Stéphane Le Roux
Template Version: 1.0
14/ 19 Print date: 07. December 2015
Copyright (C) ASM Assembly Systems GmbH & Co. Kg 2011 All rights reserved Confidential
7.3. Supported machines
Machine
SIPLACE 80 F4, F4-6, S20; F5, F5 HM, S23
SIPLACE S25 HM, S27 HM, HS50, HS 50+, HS60, HF, HF3
SIPLACE CF, CS
SIPLACE D1, D2, D3, D4
SIPLACE X2, X3, X4, X4i
SIPLACE TX1, TX2, TX2i
SIPLACE SX1, SX2, SX4, SX1 V2, SX2 V2
SIPLACE DX1, DX2, DX4
SIPLACE X4i S, X4 S, X3 S, X2 S
SIPLACE X4i S micron, X4 S micron
SIPLACE CA
SIPLACE E
7.4. Supported feeder types
Feeder Types
All WPC types
MTC 1 & 2
All waffle-pack trays
All standard SIPLACE tape feeders
All standard SIPLACE linear feeders
SIPLACE X adapters
Special feeders (Road Runner, Road Runner
XLF, Multi Stick Feeder: IPTE MSF 60 AX and
IPTE MSF XL80 AX; LED Feeder TE und LED
Feeder HS)
SIPLACE JTF-S, JTF-M and JTF-ML