00192286-03 - 第16页
1 Service manual Linear motor, secondary part SIPL ACE HS-50 Linear motor, secondary part, HS-50 1.2 Safety instructions 02/2009 Edition 16 1.2 Safety instructions W ARNING The safety instructio ns from the “Operational …
Linear motor, secondary part, HS-50 1 Service manual Linear motor, secondary part SIPLACE HS-50
02/2009 Edition 1.1 Magnets with cover sheet
15
1 Service manual
Linear motor, secondary part
SIPLACE HS-50
1.1 Magnets with cover sheet
1.1.1 Required parts
Item number of the retrofit kit: 00357143-01 1
The retrofit kit consists of: 1
– magnets with foil, 128 mm unit item no.:. 00355752-01 1 piece
– magnets with foil, 512 mm unit item no.: 00355754-01 3 pieces
– cover sheet item no.:. 00355786-01 1 piece
– supporting rail item no.: 00355787-01 1 pieces
– service manual linear motor sec. part HS-50 item no.:. 00192286-01 1 piece
– removal tool magnets (HS-50) item no.:. 00358519-01 1 piece
1
1 Service manual Linear motor, secondary part SIPLACE HS-50 Linear motor, secondary part, HS-50
1.2 Safety instructions 02/2009 Edition
16
1.2 Safety instructions
WARNING
The safety instructions from the “Operational safety” chapter of the user manual and servicing in-
structions take precedence over these instructions. 1
The SIPLACE placement machines are supplied with main power voltage.
Consequently parts of these systems carry dangerous voltages! This voltage is present at certain
modules inside the machine base, even when the machine is switched off at the main power
switch.
Incorrect handling of the placement machine or touching live parts of the machine can result in
death or severe injury, and considerable damage to equipment.
BEFORE starting any work, shut down the operating system correctly, then switch the machine
OFF at the main power switch and disconnect from the main power supply. In addition, the com-
pressed air supply must be switched off at the compressed air unit's main valve in the machine
base and vented by actuating the needle valve on the compressed air unit.
There is DANGER for heart pacemaker wearers in the vicinity of the linear motors, as described
in detail in the "Special safety instructions for working in the vicinity of strong magnetic fields"
section of the user manual and service manual.
Always follow the accident prevention regulations, DIN or other standards and special safety
rules applicable in your country.
Pay attention to the information concerning residual voltages in the Operational Safety chapter.
Follow the ESD regulations as described in the operational safety section of the operating
instructions.
During the assembly, always secure the machine to prevent access by other people and to pre-
vent it being switched on again as described in the "Lock out and tag out procedure" in the user
manual.
Working with the SITEST program further increases the risk of accident.
The SITEST program must only be used by authorized and trained personnel.
1
1
1.2.1 Definitions
1
Please note 1
1
1
1
Linear motor, secondary part, HS-50 1 Service manual Linear motor, secondary part SIPLACE HS-50
02/2009 Edition 1.2 Safety instructions
17
1.2.2 Safety instructions on magnetism
1
1
RISK TO HEART PACE-MAKER WEARERS 1
1
CAUTION POWERFUL MAGNETIC FIELD 1
1
WARNING RISC OF CRUSHING 1
: Do not approach permanent magnets when carrying metal objects made of iron, steel or nickel.
The powerful force of attraction may cause fingers to be crushed.
1
: The permanent magnets of the y axis have an extremely powerful magnetic field.
Personnel wearing heart pace-makers are NOT permitted to stand in the vicinity of
permanent magnets.
: Do not wear watches in the vicinity of permanent magnets since they can be dam-
aged.
: Do not bring magnetic data media, check or credit cards near permanent magnets -
the data on the data media may be erased by the magnetic field of the permanent
magnets.