00192286-03 - 第21页
Linear motor, secondary part, HS-50 1 Service manu al Linear mo tor, secondary part SIPLACE HS-50 02/2009 Edition 1.4 Assembly of magnets with cover sheet 21 : Clip the supporting rails on to the holes in the screws in t…
1 Service manual Linear motor, secondary part SIPLACE HS-50 Linear motor, secondary part, HS-50
1.4 Assembly of magnets with cover sheet 02/2009 Edition
20
: Insert and tighten all the screws to fix the magnetic plate in place.
: Use the Allen key to tighten the screws.
1
1
: Remove the feeler gauges.
: Tear the protective film away from the magnetic plate.
1
1
1
1
1
1
1
Linear motor, secondary part, HS-50 1 Service manual Linear motor, secondary part SIPLACE HS-50
02/2009 Edition 1.4 Assembly of magnets with cover sheet
21
: Clip the supporting rails onto the holes in the screws in the magnetic plate.
1
1
: Before you attach the second magnetic plate (to the left), place a 0.8 mm thick non-magnetic
spacer (e.g. incremental encoder film) between the magnetic plates, otherwise they will be at-
tracted to one another and will be difficult to separate.
1
1
: Place the second magnetic plate against the spacer.
1
1
1
1 Service manual Linear motor, secondary part SIPLACE HS-50 Linear motor, secondary part, HS-50
1.4 Assembly of magnets with cover sheet 02/2009 Edition
22
: Insert the spacer block into the two holes at the top of the magnetic plates.
1
You might need to use the feeler gauges, as well. 1
1
1
1
: Use all the screws to fix the magnetic plate in position, and tighten using the torque wrench.
: Remove the spacer, spacer block and feeler gauges.
: Clip the supporting rails onto the holes in the screws in the magnetic plate.
: Place the cover sheet onto the magnetic plate, making sure that the sheet lies inside the recess
in the supporting rails.
1
1
1