00193794-11_VD_SSW 505.05_de en - 第61页

Software Version Description, Station Software 505.05 07/2008 Edition 5.37 Enhancement of the station sof tware to include conveyor- related items The following conveyor-related items have been added to Version 505.03 of…

100%1 / 150
Software Version Description, Station Software 505.05 07/2008 Edition
5.36 Ball race monitoring
Ball race monitoring detects a false position of the z axis concerning the ball race during the star
rotation. Because of a false position the ball race can be damaged sooner.
At the user interface the following error message is displayed:
"3564 Ball race monitoring activated"
If the ball race monitoring is activated, the C&P head reference run is started automatically after
finishing the board. Thereby the false position of the z axis can be adjusted.
But if the ball race monitoring is activated permanently, this indicates a permanent false position of
the z axis. This can be due to the following errors:
1. Incorrect setting of the upper z-stop
2. Incorrect setting of the p-gain of the z-servo
3. To low belt voltage of the z-axis belt
4. Defect z-axis motor (transmitter unit loose)
5. Defect servo card
6. Already damaged ball race or z-axis sliding block
7. Defect z-axis guide
In this case inform your service technician.
You can deactivate the ball race monitoring and the automatic reference run by using the machine
database. For detailed information please contact the Technical Service Center Munich.
5.36.1 Restrictions
Ball race monitoring is not supported by the machines: HF and HF/3.
Ball race monitoring is activated for the following machines only for 12-seg. C&P head: HS-60, HS-
50, HS-50+, S-27 HM, S-25 HM.
60 of 150
Software Version Description, Station Software 505.05 07/2008 Edition
5.37 Enhancement of the station software to include conveyor-
related items
The following conveyor-related items have been added to Version 505.03 of the software.
5.37.1 Requirements
- Optional stopper for the modular conveyor
An optional stopper can be installed on the S-27HM, HS-60, HF and HF/3 and used instead of
the laser light barrier to position the PCB.
- Setting conveyor acceleration/deceleration
In SITEST the speed at which the PCBs are transported can be set. In addition, the acceleration
and deceleration for the modular conveyor (S-27HM, HS-60, HF, HF/3) can also be set.
- Saving the machine parameters for the conveyor
A number of different parameters can be set for the conveyor (conveyor speed, options,
calibration for width adjustment, etc.). These are lost when the conveyor controller is replaced.
These machine parameters are now saved in SITEST and can be restored.
- Calibration of the conveyor width with editable PCB width
The conveyor width of editable PCBs can be calibrated in SITEST.
5.37.2 Restrictions – optional stopper for the modular conveyor
- Within a single conveyor on a machine with 2 placement areas, it is not possible to mix a
stopper with a laser light barrier (nor would this make sense given the error message specified
under the requirements).
- Hardware-related restrictions imposed by the optional stopper are not dealt with in this
document.
61 of 150
Software Version Description, Station Software 505.05 07/2008 Edition
5.38 Supported feeder types
Note:
As of software version 505.xx bulk case feeders are also supported for HF and HF/3
machines.
Surf tape feeders are now also supported for the Twin Head on HF and HF/3 machines.
The following feeders are supported by version 505.xx of the software:
- Linear feeder type III, 9.5 mm Track type: 2
- Linear feeder type III, 10 mm Track type: 3
- Linear feeder type III, 15 mm Track type: 4
- Linear feeder type III, 30 mm Track type: 5
- 8 mm S tape feeder Track type: 150
- 3 x 8 mm S tape feeder Track type: 79
- 3 x 8 mm surf 0201 tape feeder Track type: 78
- 3 x 8 mm SL (Shutterless feeder) Track type: 76
- 12 mm S tape feeder Track type: 60
- 16 mm S tape feeder Track type: 61
- 24 mm S tape feeder Track type: 62
- 32 mm S tape feeder Track type: 63
- 44 mm S tape feeder Track type: 64
- 56 mm S tape feeder Track type: 65
- 72 mm S tape feeder Track type: 66
- 88 mm S tape feeder Track type: 67
- Bulk case feeder BC_AIR
- 8 mm surf tape feeder Track type: 80
- 12 mm surf tape feeder Track type: 81
- 16 mm surf tape feeder Track type: 82
- 24 mm surf tape feeder Track type: 83
- Manual tray Track type: No track type necessary
62 of 150