00193794-11_VD_SSW 505.05_de en - 第70页
Software Version Description, Station Software 505.05 07/2008 Edition 5.44.2 All the features of a 503 sy stem controller The following description lists all the features of version 503.xx of the software that are also c…
Software Version Description, Station Software 505.05 07/2008 Edition
5.44.1.2 Machine controller
- Head modularity, C&P6/C&P12
- Database
- Vacuum evaluation
- Head reference run
- Automatic location type detection
- Reduction in nonproductive times
- Ceramic substrate centering
- Nozzle changer on MTC
- Nozzle scanning
- Head reference run
- Switch to IPC
- End of tape detection
5.44.1.3 SITEST
- Firmware download
- Move star axis from parked position for Z and DP axis functions
- Parallel operations
- Location interrogation
- Configuration
- Head replacement
- Illumination values for live image
- Temperature sensor
- Motor adjustment
- Conveyor and tape speed
- Shut down computer
- Move gantries to set-up position
- Calibration of the MA measurement point
69 of 150
Software Version Description, Station Software 505.05 07/2008 Edition
5.44.2 All the features of a 503 system controller
The following description lists all the features of version 503.xx of the software that are also
contained in version 505.xx.
Note:
For a detailed description, see the 503.01 software version description.
- 0201 placement process
- Component sensor
- Long PCB
- Improved accuracy, level 1
- Modular conveyor
- Robustness, DLM1
- DLM2 head
- Synchronous conveyor
- SITEST GUI
- Vision error monitoring
- Synchronized restart, LCU
- Component level indicator
70 of 150
Software Version Description, Station Software 505.05 07/2008 Edition
5.44.3 All the features of a 504 system controller
The following description lists all the features of version 504.xx of the software that are also
contained in version 505.xx.
Note:
For a detailed description, see the 504.01 software version description.
- Head modularity, C&P head 6/12 on Gantry 1
- Twin head on gantry 2
- Twin Head nozzle changer
- Adapted nozzle changer for 6- nozzle and 12-nozzle C&P head
- New reject bin for 6- nozzle and 12-nozzle C&P head
- MTC 2 on locations 2 and 4
- New glass mapping plate for single and dual conveyor systems
- Stationary IC and FC cameras
- New board for multicolor camera
- SIPLACE Mobile Verifier (SMV) component barcode reader
- 2D PCB barcode reader
- GEM 504: Integration of the Twin Head and switch to µm
- Traceability 504: Support for MTC 2
- OIS 2.2: Support for the HF machine type
- Synchronous dual conveyor with PCB barcode operation
- Twin Head fine calibration
- Safe mode "Reduced speed": Slow travel of star and gantry axes with closed cover
- Emergency stop without PCB check in output conveyor
- Emergency operation: Deactivate placement area (no PCB placement, just transportation
through the machine)
71 of 150