00193794-11_VD_SSW 505.05_de en - 第71页
Software Version Description, Station Software 505.05 07/2008 Edition 5.44.3 All the features of a 504 sy stem controller The following description lists all the features of version 504.xx of the software that are also c…
Software Version Description, Station Software 505.05 07/2008 Edition
5.44.2 All the features of a 503 system controller
The following description lists all the features of version 503.xx of the software that are also
contained in version 505.xx.
Note:
For a detailed description, see the 503.01 software version description.
- 0201 placement process
- Component sensor
- Long PCB
- Improved accuracy, level 1
- Modular conveyor
- Robustness, DLM1
- DLM2 head
- Synchronous conveyor
- SITEST GUI
- Vision error monitoring
- Synchronized restart, LCU
- Component level indicator
70 of 150
Software Version Description, Station Software 505.05 07/2008 Edition
5.44.3 All the features of a 504 system controller
The following description lists all the features of version 504.xx of the software that are also
contained in version 505.xx.
Note:
For a detailed description, see the 504.01 software version description.
- Head modularity, C&P head 6/12 on Gantry 1
- Twin head on gantry 2
- Twin Head nozzle changer
- Adapted nozzle changer for 6- nozzle and 12-nozzle C&P head
- New reject bin for 6- nozzle and 12-nozzle C&P head
- MTC 2 on locations 2 and 4
- New glass mapping plate for single and dual conveyor systems
- Stationary IC and FC cameras
- New board for multicolor camera
- SIPLACE Mobile Verifier (SMV) component barcode reader
- 2D PCB barcode reader
- GEM 504: Integration of the Twin Head and switch to µm
- Traceability 504: Support for MTC 2
- OIS 2.2: Support for the HF machine type
- Synchronous dual conveyor with PCB barcode operation
- Twin Head fine calibration
- Safe mode "Reduced speed": Slow travel of star and gantry axes with closed cover
- Emergency stop without PCB check in output conveyor
- Emergency operation: Deactivate placement area (no PCB placement, just transportation
through the machine)
71 of 150
Software Version Description, Station Software 505.05 07/2008 Edition
6 Corrected errors
SC software version 505.05 contains all the error corrections of predecessor versions up to SC
software version 505.04 SP2.
Note:
Information can be found in the "Errors that have been eliminated" chapters of the following
version descriptions:
Version description 502.01 SP 5 (Item number: 00193160-05)
Version description 503.01 (Item number: 00193345-01)
Version description 503.01 SP 1 (Item number: 00193297-01)
Version description 503.02 (Item number: 00193345-02)
Version description 503.03 (Item number: 00193345-03)
Version description 503.04 (Item number: 00193345-04)
Version description 504.02 (Item number: 00193706-02)
Version description 504.02 SP1 (Item number: 00194026-01)
Version description 504.02 SP2 (Item number: 00194026-02)
Version description 505.01 (Item number: 00193794-01)
Version description 505.02 (Item number: 00193794-02)
Version description 505.02 SP 1 (Item number: 00193794-03)
Version description 505.02 SP 2 (Item number: 00193794-04)
Version description 505.03 (Item number: 00193794-05)
Version description 505.03 SP1 (Item number: 00193794-06)
Version description 505.04 (Item number: 00193794-08)
Version description 505.04 SP1 (Item number: 00193794-09)
Version description 505.04 SP2 (Item number: 00193794-10)
Corrected defects
Following defects have been fixed in the SC software version 505.05.
Error number Description
1-IHQIS On an HF/3 machine the video multiplexer did not switch the screen between ICOS
and station.
D1-33591607 An HF machine hung up with a NUC error during calibrating in component teaching
mode.
D1-33827113 On an HS60 machine it was not possible to adjust the conveyor width to 110 mm when
the long board stopper was installed. The conveyor minimum width has been changed
in the eSW.
D1-33850220 On an HS50 machine the fine calibration calculated the machine accuracy by 60µm /4
Sigma instead of 90 µm /4 Sigma.
72 of 150