slau358q.pdf - 第54页

Self Test www.ti.com 54 SLAU358Q – September 2011 – Revised October 2019 Submit Documentation Feedback Copyright © 2011–2019, Texas Instruments Incorporated Operation NOTE: Use the MSP Gang Programmer self-test capabilit…

www.ti.com

Self Test

SLAU358Q–September 2011–Revised October 2019

Submit Documentation Feedback

Operation

ERROR # 365 - Data offset in the image file error or file corrupted.

ERROR # 366 - Hex data conversion in the image file error or file corrupted.

ERROR # 367 - Image file corrupted.

ERROR # 368 - Image file cannot be unlocked

ERROR # 369 - Customized MCUs license file open error

ERROR # 370 -

WARNING: Code specified for the BSL space location, but access to the BSL is locked.

ERROR # 371 - Info memory page number is out of range.

ERROR # 372 - COM ports scan number is too low.

ERROR # 373 - Selftest data size too high.

ERROR # 374 - Data size too high.

ERROR # 377 - Gang mask ZERO. No target devices enabled. Nothing to do.

ERROR # 378 - Address definition.

ERROR # 379 - Data size is below 2.

ERROR # 380 - Invalid DCO number.

ERROR # 381 - Command not implemented.

ERROR # 382 - Wrong Target number

ERROR # 383 - Code File error.

ERROR # 384 - Password File error.

ERROR # 385 - Nothing to program/verify - empty code in selected memory space.

ERROR # 386 - Code out of range of the selected MCU.

ERROR # 387 - Invalid name index.

ERROR # 388 - Warning: Part of the code ignored. Check the memory setup.

ERROR # 391 - Image data size too long

ERROR # 392 - Terminated by user

ERROR # 393 - Code specified in the Retain Data space

ERROR # 394 - Number of tasks out of range

ERROR # 395 - Data blocks in all tasks out of range

ERROR # 396 - WARNING: Code from file is out of range in selected MCU.

ERROR # 397 - Option not supported for selected MCU.

ERROR # 398 - Wrong destination.

ERROR # 399 - The Address and Size of the Locking Options out of range.

ERROR # 400 - Warning - empty data or string.

ERROR # 401 - Invalid input parameter(s).

ERROR # 402 - Selected Image is READ ONLY and cannot be reprogrammed.

ERROR # 403 - Serial number location and code overlap.

ERROR # 404 - Serial number size error.

ERROR # 405 - No serial number found in serial number file.

ERROR # 406 - Serial number address or size error.

ERROR # 407 - Code located in the MPU-IPE space without selected access to MPU-

IPE in Memory Options.

ERROR # 408 - External Power Supply is required for selected MCU.

ERROR # 999 - Invalid error number !

2.4 Self Test

The MSP Gang Programmer Self Test program can test most of the hardware for correctness. Connect

the programmer to a computer running MSP Gang Programmer software. If using a Gang Splitter, connect

it to the MSP Gang Programmer hardware (this allows the Self Test to find short circuits in the Gang

Splitter). Disconnect all target devices, because any connected devices can modify the test results and

make them invalid.

Activate the Self Test by choosing the Tools→Self Test option from the drop-down menu. Press the Start

Self Test button, as shown in Figure 2-25, to begin. If the Self Test reports any problems then it is

advisable to send the test report to TI technical support for assistance.

Self Test

www.ti.com

SLAU358Q–September 2011–Revised October 2019

Submit Documentation Feedback

Operation

NOTE: Use the MSP Gang Programmer self-test capability to check the integrity of the hardware. Before

beginning the test, make sure that no target MCUs are connected to the MSP Gang Programmer.

Figure 2-25. Self Test

The following is a typical self test report:

=== MSP-GANG Self test results ( Saturday, November 27, 2011, 19:08:43 ) ===

Adapter SN ------: 10110012

Hardware --------: G430: 01.01

Access key ------: MSP430 - Gang Programmer

Silicon Number --: 24D4 CC47 0400 1B00

API Firmware ----: MSP-Gang A430: 01.00.08.00

BOOT Firmware ---: G430BOOT B430: 01.00.01.00

GUI Software ----: MSP-Gang-GUI G430: 01.00.08.00

DLL Software ----: MSP-Gang-DLL D430: 01.00.08.00

================ Test results =============

No. name parameter limits result status

1: Vcc Target-1 (ALL OFF) 0.00 V ( 0.00 to 0.30) Result: 0.02 V ... >> OK <<

2: Vcc Target-2 (ALL OFF) 0.00 V ( 0.00 to 0.30) Result: 0.01 V ... >> OK <<

3: Vcc Target-3 (ALL OFF) 0.00 V ( 0.00 to 0.30) Result: 0.01 V ... >> OK <<

4: Vcc Target-4 (ALL OFF) 0.00 V ( 0.00 to 0.30) Result: 0.01 V ... >> OK <<

5: Vcc Target-5 (ALL OFF) 0.00 V ( 0.00 to 0.30) Result: 0.01 V ... >> OK <<

6: Vcc Target-6 (ALL OFF) 0.00 V ( 0.00 to 0.30) Result: 0.01 V ... >> OK <<

7: Vcc Target-7 (ALL OFF) 0.00 V ( 0.00 to 0.30) Result: 0.01 V ... >> OK <<

www.ti.com

Self Test

SLAU358Q–September 2011–Revised October 2019

Submit Documentation Feedback

Operation

8: Vcc Target-8 (ALL OFF) 0.00 V ( 0.00 to 0.30) Result: 0.01 V ... >> OK <<

9: Translators VT (OFF) 0.00 V ( 0.00 to 0.50) Result: 0.01 V ... >> OK <<

10: Translators VT (ON 1.8V) 1.80 V ( 1.60 to 2.00) Result: 1.80 V ... >> OK <<

11: Translators VT (ON 2.7V) 2.70 V ( 2.50 to 2.90) Result: 2.68 V ... >> OK <<

12: Translators VT (ON 3.6V) 3.60 V ( 3.40 to 3.80) Result: 3.58 V ... >> OK <<

13: Vpp Voltage-in 10.00 V ( 8.00 to 12.00) Result: 9.96 V ... >> OK <<

14: Vpp Voltage 7.00 V ( 6.50 to 7.30) Result: 6.90 V ... >> OK <<

15: Internal Vcc-3.3V 3.30 V ( 3.20 to 3.40) Result: 3.30 V ... >> OK <<

16: Vcc Target-1 (ALL ON 1.8V) 1.80 V ( 1.60 to 2.00) Result: 1.78 V ... >> OK <<

17: Vcc Target-2 (ALL ON 1.8V) 1.80 V ( 1.60 to 2.00) Result: 1.76 V ... >> OK <<

18: Vcc Target-3 (ALL ON 1.8V) 1.80 V ( 1.60 to 2.00) Result: 1.79 V ... >> OK <<

19: Vcc Target-4 (ALL ON 1.8V) 1.80 V ( 1.60 to 2.00) Result: 1.79 V ... >> OK <<

20: Vcc Target-5 (ALL ON 1.8V) 1.80 V ( 1.60 to 2.00) Result: 1.78 V ... >> OK <<

21: Vcc Target-6 (ALL ON 1.8V) 1.80 V ( 1.60 to 2.00) Result: 1.80 V ... >> OK <<

22: Vcc Target-7 (ALL ON 1.8V) 1.80 V ( 1.60 to 2.00) Result: 1.76 V ... >> OK <<

23: Vcc Target-8 (ALL ON 1.8V) 1.80 V ( 1.60 to 2.00) Result: 1.75 V ... >> OK <<

24: Vcc Target-1 (ALL ON 2.7V) 2.70 V ( 2.50 to 2.90) Result: 2.67 V ... >> OK <<

25: Vcc Target-2 (ALL ON 2.7V) 2.70 V ( 2.50 to 2.90) Result: 2.66 V ... >> OK <<

26: Vcc Target-3 (ALL ON 2.7V) 2.70 V ( 2.50 to 2.90) Result: 2.68 V ... >> OK <<

27: Vcc Target-4 (ALL ON 2.7V) 2.70 V ( 2.50 to 2.90) Result: 2.69 V ... >> OK <<

28: Vcc Target-5 (ALL ON 2.7V) 2.70 V ( 2.50 to 2.90) Result: 2.67 V ... >> OK <<

29: Vcc Target-6 (ALL ON 2.7V) 2.70 V ( 2.50 to 2.90) Result: 2.70 V ... >> OK <<

30: Vcc Target-7 (ALL ON 2.7V) 2.70 V ( 2.50 to 2.90) Result: 2.65 V ... >> OK <<

31: Vcc Target-8 (ALL ON 2.7V) 2.70 V ( 2.50 to 2.90) Result: 2.64 V ... >> OK <<

32: Vcc Target-1 (ALL ON 3.6V) 3.60 V ( 3.40 to 3.80) Result: 3.59 V ... >> OK <<

33: Vcc Target-2 (ALL ON 3.6V) 3.60 V ( 3.40 to 3.80) Result: 3.56 V ... >> OK <<

34: Vcc Target-3 (ALL ON 3.6V) 3.60 V ( 3.40 to 3.80) Result: 3.59 V ... >> OK <<

35: Vcc Target-4 (ALL ON 3.6V) 3.60 V ( 3.40 to 3.80) Result: 3.60 V ... >> OK <<

36: Vcc Target-5 (ALL ON 3.6V) 3.60 V ( 3.40 to 3.80) Result: 3.59 V ... >> OK <<

37: Vcc Target-6 (ALL ON 3.6V) 3.60 V ( 3.40 to 3.80) Result: 3.61 V ... >> OK <<

38: Vcc Target-7 (ALL ON 3.6V) 3.60 V ( 3.40 to 3.80) Result: 3.58 V ... >> OK <<

39: Vcc Target-8 (ALL ON 3.6V) 3.60 V ( 3.40 to 3.80) Result: 3.54 V ... >> OK <<

40: Vcc discharge (100ms)Target-1 3.60 V ( 1.00 to 2.70) Result: 2.10 V ... >> OK <<

41: Vcc discharge (100ms)Target-2 3.60 V ( 1.00 to 2.70) Result: 2.00 V ... >> OK <<

42: Vcc discharge (100ms)Target-3 3.60 V ( 1.00 to 2.70) Result: 2.07 V ... >> OK <<

43: Vcc discharge (100ms)Target-4 3.60 V ( 1.00 to 2.70) Result: 2.04 V ... >> OK <<

44: Vcc discharge (100ms)Target-5 3.60 V ( 1.00 to 2.70) Result: 2.08 V ... >> OK <<

45: Vcc discharge (100ms)Target-6 3.60 V ( 1.00 to 2.70) Result: 2.13 V ... >> OK <<

46: Vcc discharge (100ms)Target-7 3.60 V ( 1.00 to 2.70) Result: 2.02 V ... >> OK <<

47: Vcc discharge (100ms)Target-8 3.60 V ( 1.00 to 2.70) Result: 2.01 V ... >> OK <<

48: Vcc Target-1 ( \#1 ON ) 0.00 V ( 3.10 to 3.50) Result: 3.27 V ... >> OK <<

49: Vcc Target-2 ( \#1 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.26 V ... >> OK <<

50: Vcc Target-3 ( \#1 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.26 V ... >> OK <<

51: Vcc Target-4 ( \#1 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.26 V ... >> OK <<

52: Vcc Target-5 ( \#1 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.26 V ... >> OK <<

53: Vcc Target-6 ( \#1 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.26 V ... >> OK <<

54: Vcc Target-7 ( \#1 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.26 V ... >> OK <<

55: Vcc Target-8 ( \#1 ON ) 3.30 V ( 0.00 to 0.50) Result: 0.26 V ... >> OK <<

56: Vcc Target-1 ( \#2 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.27 V ... >> OK <<

57: Vcc Target-2 ( \#2 ON ) 0.00 V ( 3.10 to 3.50) Result: 3.26 V ... >> OK <<

58: Vcc Target-3 ( \#2 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.26 V ... >> OK <<

59: Vcc Target-4 ( \#2 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.25 V ... >> OK <<

60: Vcc Target-5 ( \#2 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.25 V ... >> OK <<

61: Vcc Target-6 ( \#2 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.25 V ... >> OK <<

62: Vcc Target-7 ( \#2 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.25 V ... >> OK <<

63: Vcc Target-8 ( \#2 ON ) 3.30 V ( 0.00 to 0.50) Result: 0.25 V ... >> OK <<

64: Vcc Target-1 ( \#3 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.26 V ... >> OK <<

65: Vcc Target-2 ( \#3 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.26 V ... >> OK <<

66: Vcc Target-3 ( \#3 ON ) 0.00 V ( 3.10 to 3.50) Result: 3.28 V ... >> OK <<

67: Vcc Target-4 ( \#3 ON ) 0.00 V ( 0.00 to 0.50) Result: 0.26 V ... >> OK <<