DECAN_S2_Operation(ENG_Ver4.1).pdf - 第62页

Fini sh p r oduction and chang e w o rk Chap ter 5 Advanced Chip Shooter DE CAN S2 O pe rat ion H an db ook 5-1 This chapter describes the method to finish production and change t he work to new work as well as the metho…

100%1 / 92
Advanced Chip Shooter
MEMO
Items to be inspected during production
DECAN S2 Operation Handbook
4-18
Finish production and change work
Chapter 5
Advanced Chip Shooter
DECAN S2 Operation Handbook
5-1
This chapter describes the method to finish production and change the
work to new work as well as the method to turn off the power supply
to the machine after finishing production and keeping the area around
the machine clean and tidy.
Finishing Production > Finishing the Production and shutting down the machine
Finishing Production
Chapter 5
Finish production and change work
This chapter describes the method to finish production and change the work to new work as well as the method to turn off the power supply to the
machine after finishing production and keeping the area around the machine clean and tidy.
1. Finishing the Production and shutting down the
machine
Step 1.
Select the <PCB Stop> check box
ㆍ Clicking <PCB Stop> button during production will stop the production after finishing
the Production of the PCB on work.
When production is started after setting the PCB production quantity,
the machine stops automatically after PCBs as many as set are
produced even though the 'PCB Stop' button is not pressed.
Step 2.
Press the 'STOP', 'RESET' button
ㆍ Changes the machine status into the 'IDLE' mode
Finishing Production
Finish production and change work
Chapter 5
Advanced Chip Shooter
DECAN S2 Operation Handbook
5-2
This chapter describes the method to finish production and change the
work to new work as well as the method to turn off the power supply
to the machine after finishing production and keeping the area around
the machine clean and tidy.
Finishing Production > Finishing the Production and shutting down the machine
Finishing Production
Finish production and change work
Step 3.
Press the <Finish> button.
Step 4.
Click the 'Exit' icon in the 'File' menu
ㆍ Click the 'Exit' icon in the 'ETC' menu to close the MMI.