00192419-02.pdf - 第30页
30 ’ Display er rors ’ menu From the E rror hand ling menu you can acc ess the lists corres ponding t o the fo llowing er ror types: – Track errors – Machine er rors – Transport errors – General er rors The top lin e wil…
29
g This number indicates how many tracks are left to be checked. The
procedure can be followed on the bar graph.
h ’Track’
Activate
If a track has been deactivated, it can be reactivated by clicking on the
‘Activate’ button or scanning the RETURN barcode on the track barcode
bar.
Supply refilled
If a track has been deactivated by a ‘Track empty’ error, it can be
reactivated by clicking on the ‘Supply refilled’ button or scanning the
RETURN barcode on the track barcode bar.
‘Table functions’ menu
This menu is used to move all the gantries out of the feeder areas in order
to change a feeder or the component feeder table without the risk of a
head crash, for example.
PCB processing must be stopped before this menu can be used.
To do this, click on the ‘Stop processing’ icon from the main view.
Click on the ‘Set-up’ icon from the main view.
Click on the ‘Table functions’ icon.
Click on the ‘All gantries to set-up position’ button.
30
’Display errors’ menu
From the Error handling menu you can access the lists corresponding to
the following error types:
– Track errors
– Machine errors
– Transport errors
– General errors
The top line will always show the last error to occur.
a Icon for accessing the track errors menu
s Icon for accessing the machine errors menu
d Icon for accessing the transport errors menu
f Icon for accessing the general errors menu
g List of errors with title bar
Key to the abbreviations in the title bar:
No.: Error number
CmpName: Name of the component
Loc.: Component location
Tr/D/T: Track / division / tray
Seg: Number of the segment which was used for placing the component
#E: Error counter - The error counter shows how often this error has already
occurred.
Text: Explanatory text
The following abbreviations may also be encountered with other
error types:
DEV.: The originator of the error message, e.g. gantry 1, etc.
Transp.: Conveyor belt affected:
1 = Standard conveyor
2 = 2nd conveyor when the twin conveyor option has been installed
Info 1 or 2: Information of relevance to Siemens only.
h Diagnostics (option)
Select one particular error line in the list and click on Diagnostics. The
diagnostics program will be started.
j Error information
Additional information concerning the marked errors is displayed by the
information and help system.
k Delete all
Click on this button to delete all the errors of the same type. If a track is
empty, it must be filled before deleting.
l Location X track errors’
g
hj
a s d f
k
l
31
’Track errors location X’ menu
The “Track errors view” menu contains a general overview of all the track
errors. The “Track errors location X” menu also displays the errors sepa-
rately for locations 1 – 4. This list contains all track errors, apart from
‘Track empty’. The errors are also totaled and then displayed in the “Track
errors / Segment’ bar chart, sorted by segment number.
Vacuum errors 43 and 44 take the form of white bars. All other errors are
shown as black bars. The black error bars can be hidden, as required.
The track errors are not deleted when tracks or locations are filled,
although they can be deleted using the “Reset” button. The counter is
reset when a new set-up is loaded.
The tracks are displayed, sorted in ascending frequency of errors, in the
table beside the “Track errors / Segment” bar chart. This provides the rele-
vant data in a format suitable for error analysis.
’Feeders’ menu
The Feeders menu has four submenus for querying or checking the status
of all feeder modules:
– Displaying empty tracks and setting them full
– Omit components. (This menu can only be accessed from the ’Line engi-
neer’ operator control level or higher).
– Displaying magazines and changing inventory levels
Displaying and vibrating linear feeders
Type S-25 HM machine with an MTC (matrix tray changer) installed also
have a Matrix tray changer location 1 and/or Matrix tray changer location 3
submenu.