SIPLACE S-23 HM - 第379页
User Manual SIPLAC E S-23 HM 10 Component han dling Software Version SR.406.xx 02/00 US Edition 10.5 Used tape cutter 379 10.5.2 Inserting the t ape into the t ape cutter 10 Fig. 10.5 - 2 Inserting the tape into the tape…
10 Component handling User Manual SIPLACE S-23 HM
10.5 Used tape cutter Software Version SR.406.xx 02/00 US Edition
378
10.5 Used tape cutter
10.5.1 General
The placement system has a used tape cutter at each of the two component table locations. It is
used to cut off the waste tape. The cut pieces of tape drop into the waste tape container in the
component table. 10
Å Empty the waste tape container every day.
Fig. 10.5 - 1 Used tape cutter
Key to Fig. 10.5 - 1
(1) Stationary cutting blade
(2) Retainer
(3) Moving cutting blade
(4) Electronic control unit
(5) Short stroke cylinder
User Manual SIPLACE S-23 HM 10 Component handling
Software Version SR.406.xx 02/00 US Edition 10.5 Used tape cutter
379
10.5.2 Inserting the tape into the tape cutter
10
Fig. 10.5 - 2 Inserting the tape into the tape cutter
(1) Used tape channel (2) Used tape
(3) Tape feeder module (4) To used tape cutter
10 Component handling User Manual SIPLACE S-23 HM
10.5 Used tape cutter Software Version SR.406.xx 02/00 US Edition
380
PLEASE NOTE
On SIPLACE S-23 HM automatic placement systems, only use the tape feeder modules specified
for these machines. The used tape channel which removes the used tape is located upstream of
the feeder modules. 10
Å Insert the tape into the feeder as described in the corresponding section.
Å Guide the used tape into the used tape channel of the cutter as described in Fig. 10.5 - 2
The used tape guide channels are located upstream of the feeder modules. They are positioned
directly above the used tape cutters. 10
The tape is automatically guided through the used tape guide channel into the used tape cutter
below. There, the tape is shredded by the pneumatically-actuated cutting blade. The waste tape
then passes via the waste tape chute into the waste container. 10
10
Fig. 10.5 - 3 Used tape container in the component changeover table, withdrawable
(1) Component changeover table
(2) Used tape container, withdrawable