SIPLACE S-23 HM - 第397页
User Manual SIPLACE S-23 HM 11 Station extensions / hardware Software Version SR.406.xx 02/00 US Edition 11.3 Dual conveyor 397 1 1.3.7 Synchronous conveyor mode 1 1.3.7.1 Description In synchr onous mod e, two P CBs of …
11 Station extensions / hardware User Manual SIPLACE S-23 HM
11.3 Dual conveyor Software Version SR.406.xx 02/00 US Edition
396
There are two conveyor modes: "Dual conveyor synchronous" and "Dual conveyor asynchronous.
Enter the conveyor mode you wish to use in the machine data (konfig.ma). 11
11.3.3 Defining the transport tracks
The right transport track (viewed in the transport direction) is designated "Transport 1" and the left
as "Transport 2" (see Fig. 11.3 - 1). 11
11.3.4 Changing the conveyor mode
11.3.5 Asynchronous conveyor mode
11.3.5.1 Description
In asynchronous mode, only one PCB in a transport track is processed. At the same time, another
PCB in the second transport track is moved into the placement position. This saves the full con-
veying time of one PCB, thus considerably increasing performance, particularly for PCBs with a
short cycle time. 11
11.3.6 Function
Once the machine has received the job data (cluster, set-up), the PCBs on the feeding belts are
continuously transported to the available center conveyor (provided that the center conveyor is
free) throughout the placement operation. The placement sequence starts as soon as a PCB has
moved onto the center conveyor. The PCBs are processed one after another. 11
PLEASE NOTE 11
The components to be placed and the width of the PCBs must be identical on transport track 1
and 2. 11
If the placement sequence is interrupted, the conveyor interface will be disabled and the PCBs
currently on the center conveyor will be completed. 11
The conveyor interface is disabled or enabled simultaneously for both transport tracks. 11
Conveyor mode Input in konfig.ma
Single conveyor 0
Dual conveyor synchronous 1
Dual conveyor asynchronous 2
User Manual SIPLACE S-23 HM 11 Station extensions / hardware
Software Version SR.406.xx 02/00 US Edition 11.3 Dual conveyor
397
11.3.7 Synchronous conveyor mode
11.3.7.1 Description
In synchronous mode, two PCBs of the same size are moved into the placement position at the
same time. They must be processed as a single cluster. 11
This enables the top and bottom of a PCB to be processed on a single line. This reduces the time
needed to transport the PCBs, since two PCBs are always transported at the same time. 11
11.3.7.2 Function
PCBs on transport tracks 1 and 2 are moved synchronously (i.e. the conveyor belts are indepen-
dent of one another, but are controlled synchronously) on the conveyor sections. The components
to be placed for transport track 1 and 2 must be organized as a cluster in two circuit images (see
the line computer operating instructions). 11
If only one transport track (or center conveyor) is occupied at the start of the placement sequence,
the circuit image for this conveyor section is identified as "do not place". 11
11.3.8 Controlling the dual conveyor with the Single functions menu
Control of the dual conveyor and the Single functions menu are described in section 5 of this user
manual. 11
11.3.8.1 Automatic width adjustment on the dual conveyor
PLEASE NOTE 11
The conveyor setpoint width relates to both conveyor belts. When the command is received, the
conveyor belts are set to the setpoint width one after another.
Automatic width adjustment is deactivated when "synchronous conveyor" is selected. 11
11 Station extensions / hardware User Manual SIPLACE S-23 HM
11.3 Dual conveyor Software Version SR.406.xx 02/00 US Edition
398
11.3.9 Technical data for the dual conveyor
11
11.3.10 Maintenance
The individual conveyor belts and the additional lifting table require the same maintenance as the
standard conveyor. Each conveyor belt must be maintained as described in the maintenance in-
structions. 11
PCB format
50 mm x 50 mm to 460 mm x 216 mm
2" x 2" to 18" x 8.5"
PCB thickness 0.3 mm to 4.5 mm
Max. PCB warpage
On top: 4.5 mm - PCB thickness
On bottom: 0.3 mm + PCB thickness
Clearance on PCB underside 25 mm (standard), 40 mm (option)
PCB transport height
830 ± 15 mm (standard)
900 ± 15 mm (option)
930 ± 15 mm (option)
950 ± 15 mm (SMEMA option)
Type of interface Siemens (standard), SMEMA (option)
Component-free handling edge 3 mm
PCB changeover time 2.5 s
Fixed conveyor edge Right (standard), left (option)
Components on each conveyor Synchronous: same or different, asynchronous: same
PCB width on each conveyor Synchronous: different, asynchronous: same
Ink spot recognition Synchronous: not possible, asynchronous: possible
Automatic width adjustment Synchronous: not possible, asynchronous: possible