Specification SIPLACE CF-Medium - 第12页

11 Desc ription The tap e reels of the feeder mod- ules are hous ed in the t ap e con- tainer of the component change over table . A cutter automatic ally chops u p empty tap e coming out of the tape c ontainer. Feeders …

Description

SIPLACE CF can be ordered in two

standard configurations: With two

changeover tables or with one

changeover table on the left side

and one Waffle Pack Changer on

the right side of the machine.

The component feeders are sta-

tionary during the placement proc-

ess, therefore it is possible to refill

components or splice tapes with-

out stopping the machine.

Either individual feeders or the

entire changeover table can be

exchanged during changeover.

Use of component bar codes with

the aid of an optional component

bar code scanner guarantees the

correct assignment of the compo-

nent to the track.

To make full use of the advantages

of the component changeover ta-

ble, the entire set-up including the

check can also be conducted out-

side the machine at the optional

SIPLACE set-up station. The

changeover tables are equipped

with rollers and have an integrated

pneumatic lifting device, eliminat-

ing the need for a lifting device.

Exchanging the tables takes less

than 2 minutes per module.

Component Supply:

Changeover Table

Technical Data

Insert (exchangeable) In all SIPLACE placement modules

Feeder locations

59 x 8 mm tracks per table,

118 x 8 mm tracks per machine

Feeder modules

SIPLACE feeders for tapes,

stick magazines, Bulk Cases

Accessories Tape container, waste container, tape cutter

Splicing Tool

Mobile Changeover Table

Feeder Table

Centering Position

Compressed Air

Feeder Connection

Reel Container

Reject Bin

Exchange of a Feeder Changeover Table

Description

The tape reels of the feeder mod-

ules are housed in the tape con-

tainer of the component change

over table. A cutter automatically

chops up empty tape coming out

of the tape container.

Feeders used on SIPLACE are dis-

tinguished by a short cycle time

and a high-precision pick-up posi-

tion. Even product diversity and

small batch sizes can be handled

easily since the feeder set-up can

be changed quickly. The increment

of the tape cycle is just as variable

as the use of tape materials.

Thanks to the general purpose

tape feeding modules which are

equally suitable for paper and blis-

ter tapes, a small range of module

types will be sufficient. Activated

by a signal from the component

table, the modules control the en-

tire feeder sequence themselves,

including the automatic take-up of

the strips. The S Feeders series

feature shorter cycle times and

they can handle tapes with 2 mm

grids (8 mm S). 8 mm S and

12/16 mm S are equipped with

component cover.

The feeders can be used in other

SIPLACE machines as well.

Component Supply:

Tape Feeder

Technical Data

Packaging Model

Feeder

locations

Transport

distance

Max. Height

of component

Paper and

blister tapes

2 x 8 mm S

3 x 8 mm S

12/16 mm S

2 or 4 mm

2 mm

4 - 12 mm

2.5 mm

0.7 mm

14 mm

Blister tape

24/32 mm S

1 x 44 mm S

1 x 56 mm S

1 x 72 mm S

1 x 88 mm S

1.5

2.5

4 - 32 mm

4 - 44 mm

4 - 56 mm

4 - 72 mm

14 mm

Tape reels Ø 7" to 19" (178 - 464 mm)

Feeder cycle S-feeder to 20 mm transport distance < 150 ms

a) Fiducial for recognition of position of feeders;

b) only for 0201 and 0402;

c) adjustable in increments of 4 mm.

Tape Feeder Modules S

72 mm S

56 mm S

44 mm S

24/32 mm S

12/16 mm S

3 x 8 mm S

2 x 8 mm S

88 mm S

Description

The SIPLACE Bulk Case feeder

with 2 tracks is used to handle

components packaged in standard

bulk containers. It transports rec-

tangular and cylindrical passive

components to the pick up area of

the machine. To replenish the

supply, the Bulk Cases are re-

moved and replaced outside the

machine eliminating stoppages for

replenishment.

Essentially, this feeder module

consists of a base which holds 2

feeder rails. The components are

separated and transported through

the feeder rail via compressed air.

The principle of stationary compo-

nent tables has been tried and

tested specifically with Bulk Case

components. Vibrations, which

developed when other placement

methods are used may cause

wear to the components compro-

mising quality and reliability of the

components.

The stationary component table

also brings decisive advantages

for stick magazines. The general

purpose vibratory stick feeder can

be refilled during the placement

process.

The feeders can be used in other

SIPLACE machines as well.

Component Supply:

Bulk Case Feeders, Stick Magazine Feeders

Technical Data

Bulk Case feeder

Type of packaging

Bulk Case

Feeder rails for

Chip 0402 component height 0.35 mm

Chip 0402 component height 0.50 mm

Chip 0603 component height 0.45 mm

Chip 0603 component height 0.80 mm

Chip 0805 component height 0.45 mm

Chip 0805 component height 0.60 mm

Chip 0805 component height 0.85 mm

Chip 0805 component height 1.25 mm

Mini-Melf

Feeder location

1 feeder location for 2 different

component types

Stick magazine feeder Type III With control electronics

Number and width of tracks

3 x 9.5 mm

2 x 15 mm

1 x > 15 mm

1 x 30 mm

Feeder location 1

a) Fiducial to recognize position of feeder.

Bulk Case Feeder and Stick Feeders

Bulk Case Feeder

Stick Feeder

Type III