Specification SIPLACE CF-Medium - 第14页
13 Desc ription Some lo cal safety requirem ents dict ate that all feeder loc ations must be e q uip p ed wi th fee d ers. If the f ee der set-up does not fill all feed er locations, guard s may be used in place of the m…
12
Description
The SIPLACE Bulk Case feeder
with 2 tracks is used to handle
components packaged in standard
bulk containers. It transports rec-
tangular and cylindrical passive
components to the pick up area of
the machine. To replenish the
supply, the Bulk Cases are re-
moved and replaced outside the
machine eliminating stoppages for
replenishment.
Essentially, this feeder module
consists of a base which holds 2
feeder rails. The components are
separated and transported through
the feeder rail via compressed air.
The principle of stationary compo-
nent tables has been tried and
tested specifically with Bulk Case
components. Vibrations, which
developed when other placement
methods are used may cause
wear to the components compro-
mising quality and reliability of the
components.
The stationary component table
also brings decisive advantages
for stick magazines. The general
purpose vibratory stick feeder can
be refilled during the placement
process.
The feeders can be used in other
SIPLACE machines as well.
Component Supply:
Bulk Case Feeders, Stick Magazine Feeders
Technical Data
Bulk Case feeder
a
Type of packaging
Bulk Case
Feeder rails for
Chip 0402 component height 0.35 mm
Chip 0402 component height 0.50 mm
Chip 0603 component height 0.45 mm
Chip 0603 component height 0.80 mm
Chip 0805 component height 0.45 mm
Chip 0805 component height 0.60 mm
Chip 0805 component height 0.85 mm
Chip 0805 component height 1.25 mm
Mini-Melf
Feeder location
1 feeder location for 2 different
component types
Stick magazine feeder Type III With control electronics
Number and width of tracks
3 x 9.5 mm
2 x 15 mm
1 x > 15 mm
1 x 30 mm
Feeder location 1
a) Fiducial to recognize position of feeder.
Bulk Case Feeder and Stick Feeders
Bulk Case Feeder
Stick Feeder
Type III
13
Description
Some local safety requirements
dictate that all feeder locations
must be equipped with feeders.
If the feeder set-up does not fill
all feeder locations, guards may
be used in place of the modules.
SAFETY
WARNING
Component Supply:
Guard for Feeder Locations
The following guard-variants can be used:
1 SIPLACE guard for 1 location
2 SIPLACE guard for 6 - 10 locations
3 SIPLACE guard for 11 - 20 locations
Various Guards for Feeder Locations
3
2
1
14
Description
The manual tray feeder is one
option for picking up components
from waffle packs and matrix
trays. A number of “manual trays”
can be placed on the component
changeover tables (right-hand table
for Fine Pitch components). This
option is recommended if only a
few component types are supplied
in trays.
Component Supply:
Manual Trays
Technical Data
Sizes
136 x 360 mm
2
;
requires 5 feeder locations
260 x 360 mm
2
;
requires 9 feeder locations
Max. tray height 12.5 mm including component
Parts
Manual tray
Carrier tray
JEDEC Waffle Packs
Directly in the manual tray
136 mm wide
Pick & Place Head and Collect & Place Head Access to Manual Tray
Transport Direction
Collect & Place Head
Pick & Place Head
Feeder Table
136
JEDEC Magazine
119 mm
301 mm
Collect & Place
Head
Pick & Place Head
Feeder Table
260
(136)
360
Carrier Tray
157 mm
339 mm