Nordson_EFD_GV_Series_Operating_Manual - 第150页

For Nordson EFD sales and service in over 40 countries, contact Nordson EFD or go to www.nordsonefd.com. Global 800-556-3484; +1-401-431-7000 info@nordsonefd.com Europe 00800 7001 7001 infoefd.europe@nordsonefd.com Asia …

100%1 / 150
GV Series Automated Dispensing Systems
148 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
AppendixH, System Setup for Installing Software
Updates
To prevent damage to the DispenseMotion software, the C drive of the DispenseMotion controller is factory-
locked. It may be necessary to unlock the C drive to allow large updates to the DispenseMotion software to be fully
installed. Follow this procedure to check the status of the C drive and to disable this feature if needed.
NOTE: You can request the latest DispenseMotion software at www.nordsonefd.com/DispenseMotion.
# Step Reference Image
1
• Click Start > Programs > Accessories > Command
Prompt.
2
• At the command prompt, type STATUS and press
the enter key.
3
• Next to State, the system displays either ENABLED
or DISABLED. If the State is DISABLED, then the
DispenseMotion controller is configured correctly
for updates. Skip to the end of this procedure.
• If the State is ENABLED, type DISABLE and press
the enter key.
4
• Type SAVE and press the enter key.
5
• Click START > RESTART and allow the system to
reboot for the change to take effect.
• After the DispenseMotion controller reboots, open
the Command Prompt window again.
6
• Type STATUS and press the enter key.
If the main drive is unlocked, the State shows
DISABLED.
You can now install DispenseMotion software
updates or other needed software. To lock the main
drive after installing software, open the Command
Prompt window, type ENABLE > SAVE, and then
reboot the system.
GV Series Automated Dispensing Systems
149www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Notes
For Nordson EFD sales and service in over
40 countries, contact Nordson EFD or go to
www.nordsonefd.com.
Global
800-556-3484; +1-401-431-7000
info@nordsonefd.com
Europe
00800 7001 7001
infoefd.europe@nordsonefd.com
Asia
China: +86 (21) 3866 9006; china@nordsonefd.com
India: +91 80 4021 3600; india@nordsonefd.com
Japan: +81 03 5762 2760; japan@nordsonefd.com
Korea: +82-31-736-8321; korea@nordsonefd.com
SEAsia: +65 6796 9522; sin-mal@nordsonefd.com
The Wave Design is a trademark of Nordson Corporation.
©2021 Nordson Corporation 7363625 v051121
NORDSON EFD ONE YEAR LIMITED WARRANTY
This NordsonEFD product is warranted for one year [two years, five years] from the date
of purchase to be free from defects in material and workmanship (but not against damage
caused by misuse, abrasion, corrosion, negligence, accident, faulty installation, or by
dispensing material incompatible with equipment) when the equipment is installed and
operated in accordance with factory recommendations and instructions.
NordsonEFD will repair or replace free of charge any defective part upon authorized return
of the part prepaid to our factory during the warranty period. The only exceptions are those
parts which normally wear and must be replaced routinely, such as, but not limited to, valve
diaphragms, seals, valve heads, needles, and nozzles.
In no event shall any liability or obligation of NordsonEFD arising from this warranty exceed
the purchase price of the equipment.
Before operation, the user shall determine the suitability of this product for its intended use,
and the user assumes all risk and liability whatsoever in connection therewith. NordsonEFD
makes no warranty of merchantability or fitness for a particular purpose. In no event shall
NordsonEFD be liable for incidental or consequential damages.
This warranty is valid only when oil-free, clean, dry, filtered air is used, where applicable.