00198168-02_Technical_Training_TX-Series_EN - 第10页
1 Machine Safety 1.2 Warning Labels - General 10 Technical Training SIPLACE TX-Series 10/2016 Permanent magnets Permanent magnets for TX series 1. Permanent magnets for X linear motors 2. Permanent magnets for Y liner mo…
1 Machine Safety
1.1 Machine Safety
Technical Training SIPLACE TX-Series 10/2016 9
1 Machine Safety
1.1 Machine Safety
CAUTION
Any persons working on the machine must be familiar with the safety instructions in the
user manual and observe this at all times. The following safety instructions are only an
excerpt from the chapter "Operational Safety" in the SIPLACE user manual. For further
detailed safety information please refer to the User Manual that was supplied with your
machine. Please pay attention to the safety instructions as delivered by our instructor.
TX buttons and switches
1. Emergency stop button
2. Stop and start buttons
3. Button for docking and undocking the
component trolley at the respective
locations
NOTICE
DO NOT use the emergency stop button to stop the machine unless in emergency
situation! Use only the stop button (black) for general machine stop!
Permanent magnets symbol
●
Risk of death for persons with active
implants (e.g. pacemakers, insulin
pumps, defibrillators).
●
Danger of crushing for persons with
passive metal implants (e.g. plates,
screws).
●
Do not reach into the machine or bend
towards it when the protective covers
are open.
●
Do not bring any metal objects into the
area.
1 Machine Safety
1.2 Warning Labels - General
10 Technical Training SIPLACE TX-Series 10/2016
Permanent magnets
Permanent magnets for TX series
1. Permanent magnets for X linear motors
2. Permanent magnets for Y liner motors
1.2 Warning Labels - General
Warning Labels General
1. Read safety instructions before use
2. Danger of crushing – Do not reach into
the machine while it is operating
3. Yellow ring around the emergency stop
buttons
4. Dangerous Voltages – risk of electric
shock or burn – areas of the machine
where high voltages are present
5. In some areas voltages can be present for
up to 5 minutes
Warning Labels Lasers
LASER RADIATION
Laser class 2
Acc. to IEC 60825-1:2014
DO NOT look into beam!
Warning strips on the inside of the output conveyor
Risk of hand injuries (crushing) over an
extensive area.
Reaching in here can lead to injuries to the
arms and hands.
Do not reach into the inside of the
neighboring machine.
1 Machine Safety
1.3 High temperatures related to C&P20 A/M/P/M2 Head, X-Feeder 8mm and SmartFeeder 4mmX /
8mmX
Technical Training SIPLACE TX-Series 10/2016 11
1.3 High temperatures related to C&P20 A/M/P/M2 Head,
X-Feeder 8mm and SmartFeeder 4mmX / 8mmX
Areas of the C&P20 Head, X-Feeder 8mm and SmartFeeder 4mmX / 8mmX can reach high
temperatures when they have been in continuous operation.
The Star motor body can become hot during
operation – take care not to touch the parts!
1. Star motor housing
2. Grab handle
The stepper motors used by the X-feeders can
become hot during operation – take care not to
touch the parts!
3. Stepper motors
1.4 High temperature related to MHCU
●
The MHCU covers can become hot during
operation – take care not to touch the
parts!